


| Parámetro | Valor |
|---|---|
| LED (green): Power / LED (yellow): (S1/S2) / LED (red): Failure | |
| EAN | 4048879063531 |
| PIN 1 | (+) |
| PIN 2 | Port 1...7: (NO)/(S2); Port 8: diagnostic |
| PIN 3 | (-) |
| PIN 4 | (NO)/(S1) |
| PIN 5 | (Earth) |
| Clase electrónica | 27279219 |
| Alojamiento | Zinc die casting, matte nickel plated |
| Protección | IP65, IP67, IP68 inserted and tightened (EN 60529) |
| Corriente total | max. 10 A |
| Unidad de embalaje | 1 |
| Capacidad de entrada | max. 1470 µF |
| Protección de la unidad | Short-circuit, overload (PNP switching) |
| Bloqueo de puertos | Screw thread (M12×1 mm) |
| Salida de diagnóstico | active high, max. load 25 mA, M23 - PIN 18 |
| Voltaje de funcionamiento | 24 V DC (EN 61131-2) |
| Rango de temperatura | -20...+60 °C |
| país natal | CZ |
| Dimensiones alto × ancho × profundidad | 145×55×21 mm |
| Consumo actual | max. 35 mA |
| número de arancel aduanero | 85369010 |
| Descripción funcional | All M12 ports are current monitored regarding 0 V total current (contact 3), and are switched off in case of overload or short-circuit (self-resetting). Operating voltage remains the same. In case of a fault the DIAGNOSTIC signal “active high” to the PLC |
| Corriente de funcionamiento (contacto 3) | max. 2 A (shutoff 2.3...2.7 A) |
| Fuente de alimentación necesaria con el máximo de puertos | min. 20 A |
Especificaciones técnicas y datos de rendimiento
Guía de instalación y operación