En stock Producto destacado
AFP0HCCS1
AFP0HCCS1 PANASONIC Communication cassette with 1 x RS232C (5 pin)
$0.00USD
3041 en stock
Especificaciones clave
Artículo:Specifications
Observación:Notes:1) The start and end codes can be used only for general-purpose serial communications.2) The unit No. (station number) can be selected at system register.3) Sufficient noise tolerance is provided but it is recommended that a user program be created for retransmission. (To improve the reliability of communications when a communication error occurs due to an excessive noise or when the target device cannot receive data temporarily.)4) When connecting a commercially available device that has an RS-485 interface, please confirm operation using the actual device. In some cases, the number of station units, transmission distance and communication speed vary depending on the connected device.5) The transmission distance, transmission speed, and number of stations should be within the range of the graph below, depending on each value.When the transmission speed is 19,200 bits/s, you can set up to 99 stations and up to 1,200 m3,937.008 fttransmission distance.
Interfaz:RS-232C 1 channel
Peso neto:10 g approx.
Información del proveedor
PANASONIC
Productos: 4316
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Artículo | Specifications |
| Observación | Notes:1) The start and end codes can be used only for general-purpose serial communications.2) The unit No. (station number) can be selected at system register.3) Sufficient noise tolerance is provided but it is recommended that a user program be created for retransmission. (To improve the reliability of communications when a communication error occurs due to an excessive noise or when the target device cannot receive data temporarily.)4) When connecting a commercially available device that has an RS-485 interface, please confirm operation using the actual device. In some cases, the number of station units, transmission distance and communication speed vary depending on the connected device.5) The transmission distance, transmission speed, and number of stations should be within the range of the graph below, depending on each value.When the transmission speed is 19,200 bits/s, you can set up to 99 stations and up to 1,200 m3,937.008 fttransmission distance. |
| Interfaz | RS-232C 1 channel |
| Peso neto | 10 g approx. |
| Número de pieza | AFP0HCCS1 |
| Nombre del producto | FP0H communication cassettes |
| Número de producto | AFP0HCCS1 |
| Número de estaciones | - |
| Método sincrónico | Start-stop synchronization system |
| Velocidad de comunicación | 1,200(Note), 2,400(Note), 4,800, 9,600, 19,200, 38,400, 57,600, 115,200, 230,400 bits/sec.(Note): System register no. 415 cannot be used to set the baud rate to 1,200 bps. To set the baud rate to 1,200 bps, use the SYS1 instruction. If the baud rate of any of the COM ports is 2,400 bps or lower, F-ROM access will slow down.Example) F12(ICRD) instruction, P13(ICWT) instruction, etc. |
| Método de comunicación | Half-duplex system |
| Distancia de transmisión | Max. 15 m49.213 ft |
| Orden de transmisión de datos | Transmit from bit 0 in character units. |
| Configuración de comunicación | 1 : 1 communication |
| Formato de transmisión: Paridad | none / odd / even |
| Formato de transmisión: Código final | CR / CR + LF / none / ETX / Time (0 to 100 ms) |
| Formato de transmisión: Bit de parada | 1 bit / 2 bits |
| Formato de transmisión: Código de inicio | with STX / without STX |
| Formato de transmisión: Longitud de datos | 7 bits / 8 bits |
Descripción del producto
FP0H Communication Cassette. 1 Port R232C (5 Wires)
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
