

| Parámetro | Valor |
|---|---|
| -10 °C ... 70 °C (flexible installation) | |
| rojo | IDC/FLK20 (3) = () |
| Nota | The wires are marked and fitted with ferrules |
| azul | IDC/FLK20 (7) = () |
| gris | IDC/FLK20 (9) = () |
| Paso | 2.54 mm |
| negro | IDC/FLK20 (1) = () |
| marrón | IDC/FLK20 (2) = () |
| verde | IDC/FLK20 (6) = () |
| blanco | IDC/FLK20 (10) = () |
| naranja | IDC/FLK20 (4) = () |
| violeta | IDC/FLK20 (8) = () |
| amarillo | IDC/FLK20 (5) = () |
| Altitud | ≤ 2000 m |
| Blindado | no |
| blanco-rojo | IDC/FLK20 (13) = () |
| Tipo de cable | 20X0.14 [PVC] |
| blanco-azul | IDC/FLK20 (17) = () |
| blanco-gris | IDC/FLK20 (19) = () |
| marrón-negro | IDC/FLK20 (20) = () |
| blanco-negro | IDC/FLK20 (11) = () |
| blanco-marrón | IDC/FLK20 (12) = () |
| blanco-verde | IDC/FLK20 (16) = () |
| Longitud del cable | 3 m |
| Libre de halógenos | no |
| Tipo de producto | System cable |
| Estilo UL AWM | 2464/1061 |
| blanco-naranja | IDC/FLK20 (14) = () |
| blanco violeta | IDC/FLK20 (18) = () |
| blanco-amarillo | IDC/FLK20 (15) = () |
| Tipo de conductor | Round cable set |
| Línea de señal AWG | 26 |
| Revisión del artículo | 06 |
| Resistencia del cable | ≤ 145 Ω/km (20 °C) |
| Resistencia a las llamas | IEC 60332-1-2 (raw cable) |
| Método de conexión | Single wires |
| Resistencia al aceite | can withstand occasional splashes (raw cable) |
| Material conductor | Tin-plated Cu litz wires |
| Notas sobre el funcionamiento | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| Número de puestos | 20 |
| Grado de protección | IP00 |
| Resistencia de aislamiento | ≥ 20 MΩ*km (20 °C) |
| Número de conexiones | 1 |
| Vaina externa, color | gray |
| Modo de funcionamiento nominal | 100% operating factor |
| Voltaje de funcionamiento (CA) | ≤ 30 V AC |
| Voltaje de funcionamiento (CC) | ≤ 60 V DC |
| Material de la funda exterior | Semi-rigid PVC |
| Sección transversal del conductor | 20x 0.14 mm² |
| Diámetro externo del cable | 7.60 mm ±0.4 mm |
| Corriente (por ruta, 50 °C) | ≤ 1 A (Uncoiled, see derating) |
| Corriente (por ruta, 70 °C) | ≤ 0.6 A (Uncoiled, see derating) |
| Longitud de pelado (vaina) | 150 mm |
| Ciclos de inserción/retiro | > 50 |
| Diámetro del cable incluido el aislamiento | 1 mm ±0.03 mm |
| Temperatura ambiente (funcionamiento) | -40 °C ... 70 °C (fixed installation) |
| Línea de señal de estructura del conductor | 7x 0.16 mm |
| Capacidad de carga dinámica (flexión) | Max. bending cycles: 5000 (at a radius of ≥ 15x outside diameter) |
| Conexión según norma | based on IEC 60603-13 |
| Temperatura ambiente (almacenamiento/transporte) | -40 °C ... 80 °C |
| Radio de curvatura más pequeño, instalación fija | 64 mm |
| Grado de protección (Ubicación de la instalación) | ≥ IP54 (Installation location) |
| Radio de curvatura mínimo, instalación móvil | 120 mm |
Especificaciones técnicas y datos de rendimiento
Guía de instalación y operación