En stock Producto destacado
CEN-100-36
CEN-100-36 MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 36VDC / 2.65A
$0.00USD
3696 en stock
Especificaciones clave
Nombre:CEN-100-36
Estado:Do not Use for New Designs
Formato:Box
Serie:CEN-100
Información del proveedor
MEANWELL
Productos: 6448
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Nombre | CEN-100-36 |
| Estado | Do not Use for New Designs |
| Formato | Box |
| Serie | CEN-100 |
| Aprobaciones | CE, PSE, UL |
| Potencia (W) | 95,40 |
| Subformato | IP66 |
| Ancho (mm) | 62.50 |
| Altura (mm) | 40.50 |
| Entrada de CA Máx. | 295,00 |
| Entrada de CA mínima | 90,00 |
| Aplicaciones | Lighting |
| Fabricante | MEAN WELL |
| Tipo de producto | LED Driver |
| Aislamiento (V) | 3.750,00 |
| Potencia máxima (W) | 95.4 |
| Conector de entrada | Cable |
| Frecuencia de entrada | 50 Hz, 60 Hz |
| Largo/Fondo | 195.00 |
| Descripción larga | LED driver.Specially designed for powering LEDs directly in a steady stream.Format in metal boxIP66.Input range90-295Vca47-63Hz.Output in constant current2,65 A.Adjustable by external potentiometer (1,72-2,65 A).Range of output voltage with current mode constant23,4 to 36Vccaccording to demand load.Output voltage with current mode constant36Vcc.Adjustable by external potentiometer (33-40Vcc).Power:With 95.4 W.Efficiency typical:90%.Potentiometers:This model incorporates 2 external potentiometers that allows us to regulate the output voltage and the maximum output current.Input class I with grounding.Factor corrector, power>0.95to 230vac at full load.Operating temperature range of caseTcfrom-30ºCup+70ºC.Dimensions (Length x Width x Height):195 x 62,5 x 40,5 mm3 years of warranty.Manufacturer: MEAN WELL.The series CEN are LED Drvers designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source can operate in either Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current. The output voltage and the output current can be adjusted byexternal potentiometerslocated in the housing of the source.With metal housing, suitable for LED lighting and signalling mobile in dry environments, humid, and wet conditions. Valid for interior and exterior. This model has a noise and ripple maximum of 2.4 Vp-p, so that should not be used with controllers, just to feed directly into LEDs. Complies with the requirements of security at the global level for lighting. Test burn at 100% load. High reliability with PFC (correction Factor for Power) is active. |
| Conector de salida | Cable |
| Tipo de entrada CA | Single-phase |
| Garantía (años) | 3,00 |
| País natal | China |
| Corriente de salida mA | 2600, 2700 |
| Intensidad de salida mínima (mA) | 2.650,00 |
| Intensidad de salida máxima (mA) | 2.650,00 |
Descripción del producto
More details
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Detalles técnicos
LED driver.
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
