


| Parámetro | Valor |
|---|---|
| Artículo | Specifications |
| Producción | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current) |
| Detalles | Retroreflective(For transparent object sensing) |
| Producto | Compact Photoelectric Sensor |
| Material | Enclosure: PBT (polybutylene terephthalate)Lens: polycarbonateIndicator cover: polycarbonate |
| Accesorio | RF-230 (Reflector): 1 pc. |
| Histéresis | - |
| Protección | IP67 (IEC) |
| Número de pieza | CX-483-P-J |
| Nombre del producto | Compact Photoelectric Sensor CX-400 Ver.2 |
| Tiempo de respuesta | 1 ms or less |
| Rango de detección | 50 to 1,000mm1.969 to 39.37 in(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor. |
| Número de producto | CX-483-P-J |
| Objeto de detección | Ø50 mmØ1.969 inor more transparent,translucent or opaque object(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.(Note) Make sure to confirm detection with an actual sensor before use. |
| Tensión de alimentación | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Indicador de encendido | - |
| Humedad ambiental | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Resistencia a los golpes | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Iluminancia ambiental | Incandescent light: 3,000 lx or less at the light-receiving face |
| Temperatura ambiente | - 25 to +55℃-13 to +131℃ ℉(No dew condensation or icing allowed ), Storage: -30 to +70℃-22 to +158℃ ℉ |
| Consumo actual | 10 mA or less |
| Indicador de funcionamiento | Orange LED(lights up when the output is ON)(incorporated on the receiver for thru-beam type) |
| Indicador de estabilidad | Green LED(lights up under stable light received condition or stable dark condition)(incorporated on the receiver for thru-beam type) |
| Ajustador de sensibilidad | Continuously variable adjuster(incorporated on the receiver for thru-beam type) |
| Resistencia a la vibración | 10 to 500 Hz frequency, 1.5 mm0.059 inamplitude (10 G max.) in X, Y and Z directions for two hours each |
| Resistencia de aislamiento | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Salida:Operación de salida | Switchable either Light-ON or Dark-ON |
| Soportabilidad de tensión | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Elemento emisor (modulado) | Infrared LED |
| Cumplimiento de la directiva de marcado CE | EMC Directive, RoHS Directive |
| Salida: Protección contra cortocircuitos | Incorporated |
| Función automática de prevención de interferencias | Incorporated(Two units of sensors can be mounted close together.) |
| Repetibilidad (perpendicular al eje de detección) | 0.5 mm0.020 inor less |
| Elemento emisor (modulado):Longitud de onda de emisión máxima | 870 nm0.034 mil |
Especificaciones técnicas y datos de rendimiento
Guía de instalación y operación