En stock Producto destacado
DPH-102-C5
DPH-102-C5 PANASONIC Pressure sensor head DPH-100, 0 to 10bar, 1 to 5V, R1/8 male thread and M5 female threa..
$0.00USD
4042 en stock
Especificaciones clave
Artículo:Specifications
Cable:0.2 mm24-core oil resistant cabtyre cable (Models with "-R" affixed to the Model No. have bending-resistant, oil-resistant cabtyre cable)
Observación:Where measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +25 ℃+77 ℉.The sensor head can be used independently.
Detalles:Sensor head
Información del proveedor
PANASONIC
Productos: 4316
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Artículo | Specifications |
| Cable | 0.2 mm24-core oil resistant cabtyre cable (Models with "-R" affixed to the Model No. have bending-resistant, oil-resistant cabtyre cable) |
| Observación | Where measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +25 ℃+77 ℉.The sensor head can be used independently. |
| Detalles | Sensor head |
| Producto | Head-separated Dual Display Digital Pressure Sensor [For gas] |
| Material | Front case : PBT, Rear case : PBT (glass fiber reinforced), Pressure port : Stainless steel (SUS303), O-ring : NBRPressure element : Silicon diaphragm, PPS |
| Protección | IP40 (IEC) |
| Accesorios | Connector (e-CON) : 1 pc. |
| Número de pieza | DPH-102-C5 |
| Nombre del producto | Head-separated Dual Display Digital Pressure Sensor [For Gas] DPS-400 / DPH-100 |
| Puerto de presión | R1/8male thread + M5 female thread. |
| Número de producto | DPH-102-C5 |
| Tensión de alimentación | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| Extensión de cable | Extension up to total 10 m32.808 ftis possible with 0.2 mm2, or more, cable. |
| Humedad ambiental | 35 to 85 % RH, Storage : 35 to 85 % RH |
| Fluido aplicable | Air, non-corrosive gas |
| Resistencia a los golpes | 1,000 m/s2acceleration (100 G approx.) in X, Y and Z directions for three times each |
| Tipo de presión | Gauge pressure |
| Método de conexión | Connector |
| Temperatura ambiente | 0 to +50 ℃+32 to +122 ℉(No dew condensation allowed), Storage : -10 to +60 ℃+14 to +140 ℉ |
| Consumo actual | 15 mA or less |
| Peso: Peso neto | Head 10 g approx. / Cable 40 g approx. |
| Rango de presión nominal | 0 to +1.000 MPa |
| Resistencia a la vibración | 10 to 500 Hz frequency, amplitude 3 mm0.118 inor maximum acceleration 196 m/s2, in X, Y and Z directions for two hours each |
| Salida de voltaje analógica | Output voltage : 1 to 5 V (over rated pressure range)Zero point : within 1 V ± 2.5 % F.S. (vacuum / positive pressure type)within 3 V ± 3 % F.S. (compound pressure type)Span : within 4 V ± 3.5 % F.S.Linearity : within ±0.5 % F.S.Output impedance : 1 kΩ approx. |
| Resistencia de aislamiento | 50 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Peso: Peso bruto | 80 g approx. |
| Soportabilidad de tensión | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Soportabilidad a la presión | 1.5 MPa |
| Características de temperatura | Over ambient temperature range 0 to +50 ℃+32 to +122 ℉: within ±2 % F.S. of detected pressure at +25 ℃+77 ℉ |
| Cumplimiento de la directiva de marcado CE | EMC Directive, RoHS Directive |
Descripción del producto
DPH100 sensor head, positive pressure 1 MPa, R1/8 thread male + M5 female, analog output 1-5 VDC, cable 5 m.
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
