En stock Producto destacado
ELG-150-12A-3Y
ELG-150-12A-3Y MEANWELL AC-DC Single output LED Driver (CC+CV) with PFC, 3 wire input, Output 12VDC / 10A, A..
$0.00USD
3791 en stock
Especificaciones clave
Nombre:ELG-150-12A-3Y
Estado:Recommended Model
Existencias:Yes
Formato:Box
Información del proveedor
MEANWELL
Productos: 6448
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Nombre | ELG-150-12A-3Y |
| Estado | Recommended Model |
| Existencias | Yes |
| Formato | Box |
| Serie | ELG-150-V-A |
| Aprobaciones | CCC, CE, EAC, ENEC, KCC, MM, RCM, UL |
| Potencia (W) | 120,00 |
| Subformato | IP65 |
| Ancho (mm) | 63.00 |
| Altura (mm) | 35.50 |
| Entrada de CA Máx. | 305,00 |
| Entrada de CA mínima | 100,00 |
| Aplicaciones | Lighting |
| Fabricante | MEAN WELL |
| Tipo de producto | LED Driver |
| Aislamiento (V) | 3.750,00 |
| Potencia máxima (W) | One hundred twenty |
| Conector de entrada | Cable |
| Frecuencia de entrada | 50 Hz, 60 Hz |
| Largo/Fondo | 219.00 |
| Descripción larga | LED driver.Specially designed for powering LEDs directly in a steady stream.Format in metal boxIP65.Input range100-305Vca47-63Hz.Output in constant current10A.Adjustable by external potentiometer (5-10A).Range of output voltage with current mode constant6 to 12vdcaccording to demand load.The output voltage in voltage mode constant12vdc.Adjustable by external potentiometer (10,8-13,2 Vdc).Power:120W.Efficiency typical:88%.Potentiometers:This model incorporates 2 external potentiometers that allows us to regulate the output voltage and the maximum output current.Input class I with grounding. Input with 3 wires for ground.Factor corrector, power>0.95to 230vac at full load.Consumption without load <0.5 W.Operating temperature range of caseTcfrom-40ºCup+90ºC.Dimensions (Length x Width x Height):219 x 63 x 35.5 mm5 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source works on a constant current when we connect the LEDs directly to have a voltage within the range of output voltage mode constant current and a working current equal to the output current. The output current and the output voltage can be adjusted byexternal potentiometerslocated in the housing of the source.The series ELG are LED drivers, class I grounded. This version 3 has a ground wire on the input (3 wire). You can order versions in that it uses the chassis of the source as a connection to the earth, removing from the end of the model -3Y. For example ELG-150-12A.You can also work in voltage mode constant giving a fixed voltage of 12V if the load is powered at constant voltage and does not overcome the maximum output power.With metal housing IP65. The series ELG has a high efficiency designed for applications of public lighting, architectural, outdoor or any application of LED lighting need a driver of high quality. Approved HL Class I Division 2 for ex-zones in the US. |
| Conector de salida | Cable |
| Tipo de entrada CA | Single-phase |
| Garantía (años) | 5,00 |
| País natal | China |
| Corriente de salida mA | 5000, 5500, 6000, 7000, 8000, 9000, 10000 |
| Intensidad de salida mínima (mA) | 5.000,00 |
| Intensidad de salida máxima (mA) | 10.000,00 |
Descripción del producto
More details
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Detalles técnicos
LED driver.
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
