En stock Producto destacado
ELGT-150-C1050B
ELGT-150-C1050B MEANWELL AC-DC Class II Single output LED Driver (CC) with PFC, Output 142VDC / 1.05A, cable..
$0.00USD
4106 en stock
Especificaciones clave
Nombre:ELGT-150-C1050B
Estado:New
Existencias:Yes
Formato:Box
Información del proveedor
MEANWELL
Productos: 6448
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Nombre | ELGT-150-C1050B |
| Estado | New |
| Existencias | Yes |
| Formato | Box |
| Serie | ELGT-150-C-B |
| Atenuación | 0-10V, 1-10V, Resistance 0-100K, PWM Signal 10V |
| Aprobaciones | CCC, CE, ENEC |
| Potencia (W) | 150,10 |
| Subformato | IP67 |
| Ancho (mm) | 63.00 |
| Altura (mm) | 35.50 |
| Entrada de CA Máx. | 305,00 |
| Entrada de CA mínima | 100,00 |
| Aplicaciones | Lighting |
| Fabricante | MEAN WELL |
| Tipo de producto | LED Driver |
| Aislamiento (V) | 3.750,00 |
| Potencia máxima (W) | 150.1 |
| Conector de entrada | Cable |
| Frecuencia de entrada | 50 Hz, 60 Hz |
| Largo/Fondo | 219.00 |
| Descripción larga | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format in metal box sealedIP67.Input range100-305Vca47-63Hz.Output in constant current1050mA.Range of output voltage with current mode constantSeventy twoto 143Vccaccording to demand load.Power:150,1 W.Efficiency typical:92%.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10V,a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Class II with functional earth for EMC.Factor corrector, power>0.95to 230vac at full load.Consumption without load <0.5 W.Operating temperature range of caseTcfrom-40ºCup+90 ° CDimensions (Length x Width x Height):219 x 63 x 35.5 mm5 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source works on a constant current when we connect the LEDs directly to have a voltage within the range of output voltage mode constant current and a working current equal to the output current.The series ELGT are LED drivers, class II with functional earth for EMC. The cabinet itself has a double insulation improve the protection against lightning and transients without the use of cable earth.With metal housing, waterproof to IP67. The series ELGT has a high efficiency designed for applications of public lighting, architectural, outdoor or any application of LED lighting need a driver of high quality.Can be adjusted by regulatory assets or liabilities0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Conector de salida | Cable |
| Tipo de entrada CA | Single-phase |
| Garantía (años) | 5,00 |
| País natal | China |
| Corriente de salida mA | One thousand fifty |
| Intensidad de salida mínima (mA) | 1.050,00 |
| Intensidad de salida máxima (mA) | 1.050,00 |
Descripción del producto
More details
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Detalles técnicos
LED driver dimmable.
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
