Horario de atención: Lunes a Viernes 9:00-18:00
EV-T2M4CC-DC200A-8,6M50ESBK11 - EV-T2M4CC-DC200A-8,6M50ESBK11 1347402 PHOENIX CONTACT CHARX connect, DC charging cable with vehicle charging..
En stock Producto destacado

EV-T2M4CC-DC200A-8,6M50ESBK11

EV-T2M4CC-DC200A-8,6M50ESBK11 1347402 PHOENIX CONTACT CHARX connect, DC charging cable with vehicle charging..

$1,040.91USD
59 en stock
Especificaciones clave
:for installation at charging stations for electromobility (EVSE)
Tipo:DC charging cable
Profundidad:267 mm
Etiqueta:14.1 mm x 44.8 mm (customer logo on request)
Información del proveedor
Productos: 0
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico

Especificaciones técnicas

ParámetroValor
for installation at charging stations for electromobility (EVSE)
TipoDC charging cable
Profundidad267 mm
Etiqueta14.1 mm x 44.8 mm (customer logo on request)
Ancho75 mm
Codificación1500 Ω (between PE and PP)
Diseñowith connected PP contact
Altura139 mm
Número3 (PE, DC+, DC-)
Altitud5000 m (above sea level)
Tipo de cableClass 6
TecnologíaCombined Charging System
Solicitudfor charging electric vehicles (EV) with direct current (DC)
Coeficiente3850 ppm/K
Tipo de sensorPt 1000
Logotipo fijadoPHOENIX CONTACT logo
Longitud del cable8.6 m ±45 mm
Peso del cablemax. 1620 kg/km
Tipo de productoDC charging cable
Modo de cargaMode 4
Color (Cable)black (9005)
Corriente nominal200 A (up to 40 °C)
Tensión nominal1000 V DC
Radio de curvaturamin. 281 mm (10x Ø)
Potencia de carga200 kW
Familia de productosCHARX connect standard
Estructura del cable2 x 50 mm² + 1 x 25 mm² + 3 x 2 x 0.75 mm²
Color (Carcasa)black (9005)
Fuerza de inserción< 100 N
Punto de fijaciónSensor for the DC contacts
Resistencia del cable≤ 0.00039 Ω/m (based on a power core, at an ambient temperature of 20°C)
Corriente de carga200 A
Fuerza de retirada< 100 N
Estándar de cargaCCS type 2
Sección transversal AWG(converted acc. to IEC)
Temperatura ambiente-50 °C ... 130 °C (Operation)
Color (área del controlador)gray (7042)
Color (cara de apareamiento)black (9005)
Estabilidad a largo plazo0.06 % (after 1000 hours at 130 °C)
Normas/regulacionesDIN EN 60751
Certificaciones de cableadoVDE-Reg.
Color (Tapa protectora)black (9005)
Material de la funda exteriorTPE-U
Temperatura de apagado90 °C ±1 K (equivalent to a Pt 1000 value of 1346.5 Ω)
Monitoreo de temperatura2x Pt 1000
Diámetro externo del cable28.1 mm ±0.5 mm
Tipo de corriente de cargaDC
Material (superficie de contacto)Silver
Ciclos de inserción/retiro> 10000
Tipo de transmisión de señalPulse width modulation with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121
Corriente medida recomendada1 mA (1 V at 0°C)
Normas/regulaciones de cableadoprEN 50620/DIN EN 50620
Material (cubierta exterior del cable)TPE-U
Nota sobre el método de conexiónCrimp connection, cannot be disconnected
Longitud de pelado de la funda140 mm ±10 mm
Temperatura ambiente (funcionamiento)-30 °C ... 40 °C
Restricciones normativas de longitud de cableNOTE: Cable management may be required.
Material (Conector de carga del vehículo)Plastic
Temperatura ambiente (almacenamiento/transporte)-40 °C ... 80 °C
Grado de protección (Conector de carga del vehículo)IP44 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)

Descripción del producto

CHARX connect standard, DC charging cable, with vehicle charging connector and open cable end, for charging electric vehicles (EV) with direct current (DC), with connected PP contact, with replaceable
Características clave
  • Calidad de grado industrial
  • Cumple con RoHS
  • Certificado CE
  • Garantía de 1 año

Documentos del producto

Hoja de datos

Especificaciones técnicas y datos de rendimiento

Manual de usuario

Guía de instalación y operación

Top