

| Parámetro | Valor |
|---|---|
| 7 Nm (Support: EN 62444) | |
| Color | Brass color |
| Blindado | yes |
| Solicitud | EMC |
| Libre de halógenos | no |
| Fabricante | BIMED |
| Tipo de producto | Cable screw gland |
| Paso de rosca | 1.5 mm |
| Nota de montaje | Method 1Cut the outer sheath, but do not remove it. Feed the cable through the screw connection and then remove the outer sheath. Now pull the cable back until the connection is established between the cable shield and the contact spring.Method 2Push the braided shield back around 15 ... 20 mm over the outer sheath. Insert the cables into the screw connection until the connection is established between the cable shield and the contact spring. |
| Diámetro del agujero | 16.1 mm ... 16.2 mm |
| Revisión del artículo | 00 |
| Par de apriete | 7 Nm (Union nut) |
| Dibujo dimensional | |
| Grado de protección | IP68 (5 bar, 30 minutes) |
| Material del sello Junta tórica | Perbunan |
| Tamaño de llave, soporte | 20 mm |
| Diseño, alivio de tensión | A |
| Tamaño de llave, tuerca de unión | 20 mm |
| Clasificación de envolvente (NEMA) | 4X |
| Diámetro externo del cable | 5 mm ... 10 mm |
| Categoría de impacto de choque | 6 |
| Designación del fabricante | BMEM-E1 |
| Material de sellado Sello de cable | CR |
| Dimensión angular del hexágono | 22 mm |
| Material Anillo de compresión | PA 6 |
| Lado de conexión de tipo rosca | M16 x 1.5 |
| Material para conexión por tornillo | Brass, nickel-plated |
| Ejecución del alivio de tensión | A |
| Temperatura ambiente (funcionamiento) | -40 °C ... 100 °C (static) |
| Longitud de la rosca de conexión | 7 mm |
| Diámetro del cable sin funda | 4 mm (Diameter of braided shield) |
| Rango de sujeción del clip de alivio de tensión | 6.00 mm ... 10.00 mm (for UL 514 B) |
Especificaciones técnicas y datos de rendimiento
Guía de instalación y operación