G38001015800

Master Channel GeneratorTypes G 3800 0015, G 3800 1015Duline®FieldbusInstallationbus• Programmable channel generator• Option for built-in GSM Modem for monitoring and control via SMS• User-friendly configuration via Windows 98/2000/NT/XPsoftware• Real-time, timer and logic functions• Analog set-point control and monitoring• Light and Rollerblind control functions• Alarm Monitoring• Option for Radio controlled clock for high real time accuracy• 2 x RS232 ports for configuration and Dupline data read/write• 1 x RS485 port for networking of up to 32 Master Generators• Modbus-RTU protocol• Built-in software driver for external radio modem• 4 digital inputs / 4 digital outputs on-board• H8-housing for DIN-rail mounting (EN50022)• AC or DC power supplyProduct DescriptionOrdering KeyG 3800 1015 230Programmable channel gene- rator with built-in dedicated intelligent functions for light and roller blind control, alarm monitoring and analog set- pointcontrol.In additionto that, there is realtime-, timer-can be used for monitoring and control of Dupline signals via SMS. Up to 32 Master generators can be networked as slaves in a RS485 network using the Modbus protocol. The unit has 4 digital inputsType: Dupline® H8-housing GSM phoneMaster channel generatorSupplyType Selectionandlogic-functions. Pro-and 4 digital outputs on-gramming is easily performed through Windows-based con- figurationsoftware.An optional built-in GSM modemboard,and itis possibleto create links to other Dupline networksvia external Radio Modem.SupplyOrdering no.Ordering no.w. GSM telephone115/230 VACG 3800 0015 230G 3800 1015 23010-30 VDCG 3800 0015 800G 3800 1015 800Input/Output SpecificationsSerial PortRS 232COM 1115 kBaudCOM 29600 Baud, adjustableData format 8 bitCOM 1, COM 2 No parity1 stop bit9-pole female SUB-D Pin assignmentTxDPin 2RxDPin 3GNDPin 5Dielectric voltageCom.port - Dupline®≥ 2 kVAC (rms) Protocol Modbus-RTURS 485 TerminationPin 27When in use, connect to pin 31Fs-BPin 28When in use, connect to pin 30Fs-APin 29When in use, connect to pin 31Digital outputs 4 PNP transistors FunctionProgrammable Output voltage VDD ≤ 35 VDCOutput current≤ 100 mA Output voltage drop ≤ 2 VOff-state leakage current≤ 100 µA Short-circuit protection None Built-in protective diodes None Dielectric voltageOutput - Dupline® ≥ 4 kVAC (rms) Output - Input 200 VInductive loads External noise suppression requiredInputsDigital 6 - 30 VDC Voltage ON > 5.5 VOFF < 1.5 V Current≤ 6 mA Dielectric voltageInput - Dupline ® ≥ 4 kVAC+ (B) Pin 30- (A) Pin 31GNDPin 32V+Pin 33*)ProtocolModbus-RTUDupline® OutputDupline® carrierOutput voltage8.2 V Current< 130 mA Short-circuit protection Yes Sequence time32 channels38.6 ms128 channels132.3 msGSM ModemSiemens cellular engine TC35Dual Band EGSM900 and GSM1800Output power Class 4 (2 W) EGSM900Class 1 (1 W) GSM1800Antenna connector FME*)V+ and GND may be usedas supply for digital I/O’s, if RS 485 is not used.Specifications are subject to change without notice (03.11.2008) 1Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group