En stock Producto destacado
HBG-240-60BOL2
HBG-240-60BOL2 MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 60 VDC / 4.0A, IP67, for in-..
$0.00USD
4899 en stock
Especificaciones clave
Nombre (Detalles):HBG-240-60BOL2
Estado (Detalles):Recommended Model
Stock (Detalles):Yes
Formato (Detalles):Box
Información del proveedor
MEANWELL
Productos: 6448
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Nombre (Detalles) | HBG-240-60BOL2 |
| Estado (Detalles) | Recommended Model |
| Stock (Detalles) | Yes |
| Formato (Detalles) | Box |
| Serie (Detalles) | HBG-240-B |
| Aprobaciones (Detalles) | CCC, CE, EAC, ENEC, UL |
| Potencia (W) (Detalles) | 240,00 |
| Reglamento (Detalles) | 1-10V, Resistance 0-100K, PWM Signal 10V |
| Subformato (Detalles) | IP67 |
| Ancho (mm) (Detalles) | 191.50 |
| Altura (mm) (Detalles) | 69.00 |
| Entrada de CA máxima (detalles) | 305,00 |
| Entrada de CA mínima (Detalles) | 90,00 |
| Aplicaciones (Detalles) | Lighting |
| Fabricante (Detalles) | OLFER |
| Tipo de producto (Detalles) | LED Driver |
| Aislamiento (V) (Detalles) | 3.750,00 |
| Potencia máxima (W) (Detalles) | Two hundred forty |
| Conector de entrada (Detalles) | Cable |
| Frecuencia de entrada (Detalles) | 50 Hz, 60 Hz |
| Largo/Fondo (Detalles) | 191.50 |
| Descripción larga (Detalles) | LED driver dimmablewith modification of output cables.Specially designed for powering LEDs directly in a steady stream.Format, round, plastic, patented, waterproof,IP67.Input range90-305Vca47-63Hz.Output in constant current4A.Range of output voltage with current mode constant36 to 60Vccaccording to demand load.Power:240W.Efficiency typical:93,5%.Regulationfrom 10% to 100% of the output intensity with a slider1-10V, a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can not turn off the output, we can only go down to 10%.Input class I with grounding.Factor corrector, power>0,95to 230vac at full load.Output leads V+ and V - modified 350mm for use CoolBay Tera.Operating temperature range of caseTcfrom-40ºCup+75ºC.Dimensions (Diameter x Height):191,5 x 69mm.5 years of warranty.Manufacturer: OLFER.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This version has the output leads V+ and V - modified 350mm long (240mm cable with a hose and 110mm with only the black cable and red) so that you can use the sinks in the range CoolBay Tera in the mounting of the bells.This source works on a constant current when we connect the LEDs directly to have a voltage within the range of output voltage mode constant current and a working current equal to the output current.You can also work in voltage mode constant giving a fixed voltage of 60V if the load is powered at constant voltage and does not overcome the maximum output power.With shell circular plastic IP67. The series HBG is specially designed for the bells and LED spotlights, scenarios, and bays. Intended for applications in dry, damp or wet, both in exterior and in interior. Input class I with grounding.Can be adjusted by regulatory assets or liabilities1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any dimmer 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Conector de salida (Detalles) | Cable |
| Tipo de Entrada CA (Detalles) | Single-phase |
| Garantía (Años) (Detalles) | 5,00 |
| País de origen (Detalles) | China |
| Corriente de salida mA (Detalles) | Four thousand |
| Intensidad de salida mínima (mA) (Detalles) | 4.000,00 |
| Intensidad de salida máxima (mA) (Detalles) | 4.000,00 |
Descripción del producto
More details
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Detalles técnicos
LED driver dimmablewith modification of output cables.
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
