En stock Producto destacado
HLC1CM
HLC1CM HL-C1C-M PANASONIC Driver for connecting 2 sensor heads HL-C1 series
$0.00USD
3584 en stock
Especificaciones clave
Artículo:Specifications
Peso:Net weight: 300 g approx.
Detalles:Controller
Producto:Ultra High-speed Laser Displacement Sensor [CCD Style]
Información del proveedor
PANASONIC
Productos: 4316
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Artículo | Specifications |
| Peso | Net weight: 300 g approx. |
| Detalles | Controller |
| Producto | Ultra High-speed Laser Displacement Sensor [CCD Style] |
| Accesorio | - |
| Número de pieza | HL-C1C-M |
| Salida de alarma | Photo-MOS relay- Maximum load current: 50 mA- Applied voltage: 30 V DC or less (between alarm output and COM)- ON impedance: 35 Ohm or less- Operation time: Max. 2 ms |
| Longitud del cable | Power line: Less than 10 m 32.808 ftSignal line: Less than 30 m 98.425 ft |
| Nombre del producto | Ultra High-speed Laser Displacement Sensor HL-C1(Discontinued) |
| Frecuencia de muestreo | Selectable from 100 micro s / 144 micro s / 200 micro s / 255 micro s / 332 micro s / 498 micro s / 1,000 micro s |
| Funciones de retención | Selectable from NORMAL / P-P / PEAK / VALLEY(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Número de producto | HL-C1C-M |
| Tensión de alimentación | 24 V DC plus or minus 10 % including ripple 0.5 V (P-P) |
| Filtros digitales | High pass: OFF, 10 to 2,000 Hz (9 steps)Low pass: OFF, 10 to 2,000 Hz (9 steps)(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Indicadores: OSCURO | Red LED (lights up upon disabled measurement due to insufficient light at sensor head 1 or 2) |
| Puesta a cero en la entrada | Zero set: ON when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input |
| Calibración: Intervalo | 0.9000 to 1.1000(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Entrada de puesta a cero desactivada | Zero set: OFF when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input |
| Calibración: Cambio | plus or minus 20.0000 mm plus or minus 0.787 in(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Consumo actual | When 1 sensor is connected: 430 mA approx.When 2 sensors are connected: 550 mA approx. |
| Indicadores: BRILLANTES | Red LED (lights up upon disabled measurement due to excessive light at sensor head 1 or 2) |
| Funciones de cálculo | L plus or minus KA, L plus or minus KB, L plus or minus K (A plus or minus B)A, B: Sensor head 1, Sensor head 2 measurement values, L = plus or minus 999.9999, K = 0.0001 to 99.9999(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Entrada/salida en serie | RS-232C |
| Cabezal sensor Connectale | Maximum 2 sensor heads |
| Salida analógica: Corriente | Output current: 4 to 20 mA/F.S. [default setting when diffuse reflective mode is selected (Note 2)]Output range: 0 to 29.5 mA (maximum of 25 mA at max. load impedance)Load impedance: 250 Ohm or less(Note 1) The maximum analog output current will vary with load impedance.(Note 2) If specular reflective mode is selected, then the default setting is 5.6 to 18.4 mA/F.S. |
| Salida analógica: Voltaje | Output voltage: plus or minus 5 V/F.S. [default setting when diffuse reflective mode is selected (Note) ]Output range: -10.9 to +10.9 VOutput current: Max. 2 mA, Output impedance: 50 Ohm(Note) If specular reflective mode is selected, then the default setting is plus or minus 4 V/F.S. |
| Número promedio de muestras | OFF, 2 to 32,768 times (16 steps)(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Resultados del juicio (O1, O2) | Photo-MOS relay- Maximum load current: 50 mA- Applied voltage: 30 V DC or less (between judgment output and COM)- ON impedance: 35 Ohm or less- Operation time: Max. 2 ms |
| Indicadores: Emisión láser | Green LED (lights up during laser emission from sensor head 1 or sensor head 2, or immediately before laser emission) |
| Características de temperatura | plus or minus 0.01 % F.S./degrees |
| Entrada de temporización (emisión láser) | Laser emission stops or continues when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input or there is an open circuit: determined based on input mode selection. |
| Salida de alarma: Operación de salida | Opened when the amount of light is excessive or insufficient. |
| Salida de alarma: Protección contra cortocircuitos | Incorporated |
| Resistencia ambiental: Humedad ambiente | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Resistencia ambiental: Resistencia a los golpes | 196 m/s2 (20 G approx.) in X, Y and Z directions for 3 times each |
| Salidas de juicio (O1, O2): Operación de salida | Opened or closed when the threshold value is reached. Determined based on judgment output mode selection. (The threshold value varies with the hysteresis setting.) |
| Resistencia ambiental: Temperatura ambiente | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| Resistencia ambiental: Resistencia a la vibración | 10 to 55 Hz frequency (period: 1 min.) 0.75 mm 0.030 in amplitude in X,Y and Z directions for 30 min. each |
| Resultados del juicio (O1, O2): Categoría de utilización | DC-12 or DC-13 |
| Salidas de juicio (O1, O2): Protección contra cortocircuitos | Incorporated |
Descripción del producto
More details
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
