En stock Producto destacado
HVGC-150-500AB
HVGC-150-500AB MEANWELL AC-DC Single output LED driver Constant Current (CC) with built-in PFC, Output 0.5A ..
$0.00USD
3684 en stock
Especificaciones clave
Nombre:HVGC-150-500AB
Estado:New
Formato:Box
Serie:HVGC-150-AB
Información del proveedor
MEANWELL
Productos: 6448
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Nombre | HVGC-150-500AB |
| Estado | New |
| Formato | Box |
| Serie | HVGC-150-AB |
| Atenuación | 0-10V, 1-10V, Resistance 0-100K, PWM Signal 10V |
| Aprobaciones | EC, EAC, MM, UL |
| Potencia (W) | 150,00 |
| Subformato | IP65 |
| Ancho (mm) | 68.00 |
| Altura (mm) | 38.80 |
| Entrada de CA Máx. | 528,00 |
| Entrada de CA mínima | 180,00 |
| Aplicaciones | Lighting |
| Fabricante | MEAN WELL |
| Tipo de producto | LED Driver |
| Aislamiento (V) | 3.750,00 |
| Potencia máxima (W) | One hundred fifty |
| Conector de entrada | Cable |
| Frecuencia de entrada | 50 Hz, 60 Hz |
| Largo/Fondo | 245.00 |
| Descripción larga | LED driver dimmable with phase input.Specially designed for powering LEDs directly in a steady stream.Format in metal boxIP65.Input range180-528Vca47-63Hz.Output in constant current500mA.Adjustable by external potentiometer (300-500mA).Range of output voltage with current mode constant30 to 300Vccaccording to demand load.Power:150W.Efficiency typical:91%.Potentiometer:This model incorporates 1 external potentiometer that allows us to regulate the maximum output current.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10V,a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Input class I with grounding.Factor corrector, power>0,98to 230vac at full load.Operating temperature range of caseTcfrom-40ºCup+80ºC.Dimensions (Length x Width x Height):245 x 68 x 38,8 mm5 years of warranty.Manufacturer: MEAN WELLThis source can work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source works on a constant current when we connect the LEDs directly to have a voltage within the range of output voltage mode constant current and a working current equal to the output current. In this version AB, the output current can be adjusted byexternal potentiometerlocated in the housing of the sourcein addition to having regulation 0-10V/1-10V, 10V PWM, or resistance.The series HVG are LED drivers, class I grounded.With metal housing IP65. The series HVG has a high efficiency designed for applications of public lighting, exterior, interior, or any application of LED lighting. Approved HL Class I Division 2 for ex-zones in the US. Complies with the requirements of security at the global level for lighting.Can be adjusted by regulatory assets or liabilities0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver.Compatible with any dimmer 1-10V-market both assets and liabilities. Does not work with dimmers Triac dimmer cutting phase.Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open)SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Conector de salida | Cable |
| Tipo de entrada CA | Three-phase |
| Garantía (años) | 5,00 |
| País natal | China |
| Corriente de salida mA | 300, 350, 400, 450, 500 |
| Intensidad de salida mínima (mA) | 300,00 |
| Intensidad de salida máxima (mA) | 500,00 |
Descripción del producto
More details
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Detalles técnicos
LED driver dimmable with phase input.
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
