


| Parámetro | Valor |
|---|---|
| Nombre (Detalles) | IDLC-45A-500 |
| Estado (Detalles) | New |
| Formato (Detalles) | Box |
| Serie (Detalles) | IDLC-45A |
| Aprobaciones (Detalles) | CCC, CE, ENEC, UL |
| Potencia (W) (Detalles) | 45,00 |
| Reglamento (Detalles) | 0-10V, 1-10V, PWM Signal 10V |
| Subformato (Detalles) | IP20 |
| Ancho (mm) (Detalles) | 75.00 |
| Altura (mm) (Detalles) | 25.00 |
| Entrada de CA máxima (detalles) | 295,00 |
| Entrada de CA mínima (Detalles) | 90,00 |
| Aplicaciones (Detalles) | Lighting |
| Fabricante (Detalles) | MEAN WELL |
| Tipo de producto (Detalles) | LED Driver |
| Aislamiento (V) (Detalles) | 3.750,00 |
| Potencia máxima (W) (Detalles) | Forty five |
| Conector de entrada (Detalles) | Quick Connector |
| Frecuencia de entrada (Detalles) | 50 Hz, 60 Hz |
| Largo/Fondo (Detalles) | 120.00 |
| Descripción larga (Detalles) | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format in plastic boxIP20.Input range90-295Vca47-63Hz.Output in constant current500mA.Range of output voltage with current mode constant54 to 90Vccaccording to the number d eLEDs in series.Power:45W.Efficiency typical:85%.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10Vor a PWM signal of 10V with a frequency of 100Hz to 3KHz. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Input class II without grounding.Factor corrector, power>0.92to 230vac at full load.OutputAuxiliary 12V/50mA.Consumption without load <1,2 W.Operating temperature range of caseTcfrom-20ºCup+85ºC.Dimensions (Length x Width x Height):120 x 75 x 25mm.3 years of warranty.Manufacturer: MEAN WELL.The series IDLC are LED drivers designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream. The A version has an outputauxiliaryof12V/50mA.With plastic housing designed for lighting applications in interior.Low ripple current, no flicker (flicker-free).This source works on a Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.These sources can be dimmed with dimmers assets or liabilities of0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regular LED strips, we recommend the series IDLV or PWM.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Conector de salida (Detalles) | Quick Connector |
| Tipo de Entrada CA (Detalles) | Single-phase |
| Garantía (Años) (Detalles) | 3,00 |
| País de origen (Detalles) | China |
| Corriente de salida mA (Detalles) | Five hundred |
| Intensidad de salida mínima (mA) (Detalles) | 500,00 |
| Intensidad de salida máxima (mA) (Detalles) | 500,00 |
Especificaciones técnicas y datos de rendimiento
Guía de instalación y operación