En stock Producto destacado
IDPC-25-350
IDPC-25-350 MEANWELL AC-DC Constant Current LED Driver (CC) with PFC, PCB open frame type, Output 70VDC / 0...
$0.00USD
3014 en stock
Especificaciones clave
Nombre:IDPC-25-350
Estado:New
Formato:Open Format
Serie:IDPC-25
Información del proveedor
MEANWELL
Productos: 6448
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Nombre | IDPC-25-350 |
| Estado | New |
| Formato | Open Format |
| Serie | IDPC-25 |
| Atenuación | 0-10V, 1-10V, PWM Signal 10V |
| Aprobaciones | CCC, CE, ENEC, UL |
| Potencia (W) | 24,50 |
| Ancho (mm) | 72.50 |
| Altura (mm) | 20.00 |
| Entrada de CA Máx. | 295,00 |
| Entrada de CA mínima | 90,00 |
| Aplicaciones | Lighting |
| Fabricante | MEAN WELL |
| Tipo de producto | LED Driver |
| Aislamiento (V) | 3.750,00 |
| Potencia máxima (W) | 24.5 |
| Conector de entrada | Quick Connector |
| Frecuencia de entrada | 50 Hz, 60 Hz |
| Largo/Fondo | 114.50 |
| Descripción larga | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Open format typePCBS.Input range90-295Vca47-63Hz.Output in constant current350mA.Range of output voltage with current mode constant49 to 70Vccaccording to demand load.Power:24,5 W.Efficiency typical:82%.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10Vor a PWM signal of 10V with a frequency of 100Hz to 3KHz. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Input class II without grounding.Factor corrector, power>0.92to 230vac at full load.Consumption without load <0.5 W.Operating temperature range of caseTcfrom-20ºCup+50ºC.Dimensions (Length x Width x Height):114,5 x 72.5 x 20mm.3 years of warranty.Manufacturer: MEAN WELL.The series IDPC are LED drivers designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream. With an open format PCB type designed for lighting applications in interior. Low ripple current, no flicker (flicker-free).This source works on a Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.These sources can be dimmed with dimmers assets or liabilities of0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regular LED strips, we recommend the series IDPV.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Conector de salida | Quick Connector |
| Tipo de entrada CA | Single-phase |
| Garantía (años) | 3,00 |
| País natal | China |
| Corriente de salida mA | Three hundred fifty |
| Intensidad de salida mínima (mA) | 350,00 |
| Intensidad de salida máxima (mA) | 350,00 |
Descripción del producto
More details
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Detalles técnicos
LED driver dimmable.
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
