


| Parámetro | Valor |
|---|---|
| Artículo | Specifications |
| Eje | Round shaft |
| Serie | MBMU |
| Producto | Brushless Motors |
| Características | Speed control type, 50 W ・90 W・130 W, Input power supply for Amplifier: Voltage AC 100 V/200 V, Rated speed 3000 r/min |
| Sello de aceite | without |
| Masa (kg) | 0.7 |
| Número de pieza | MBMU5AZAS |
| Nombre del producto | MINAS-BL GV Series |
| Potencia nominal | 50 W |
| Clase de protección | IP65 |
| –Acerca del recinto | Excluding the shaft pass-through section and cable end connector.These motors conform to the test conditions specified in EN standards (EN60529, EN60034-5).Do not use these motors in application where water proof performance is required such as continuous wash-down operation. |
| Dimensión cuadrada de la brida | 80 mm sq. |
| Clase de aislamiento del motor | 130(B) (UL certified 105 (A)) |
| Par nominal (N ⋅ m) | 0.16 |
| Especificaciones de voltaje | 100 V/200 V common |
| Rango de control de velocidad (r/min) | 30 to 4000* Adjustment of the parameters is necessary depending on the workload conditions. |
| Velocidad de rotación nominal (r/min) | 3000 |
| –Acerca de la velocidad de rotación nominal | Motor shaft speed: to be multiplied by the reduction ratio when the gear head is used. |
| Momento de inercia del rotor (x10-4kg ⋅ m²) | 0.12 |
| Par de arranque (Valor representativo) (N ⋅ m) | 0.24 |
Especificaciones técnicas y datos de rendimiento
Guía de instalación y operación