En stock Producto destacado
MCDS18125
MCDS18125 ELDON Floor standing, 1800x1200x500
$0.00USD
4822 en stock
Especificaciones clave
Nombre de la función:Feature Value
Profundidad (EF000049):None mm
Ancho (EF000008):None mm
Color (EF000007):
Información del proveedor
ELDON
Productos: 4827
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Nombre de la función | Feature Value |
| Profundidad (EF000049) | None mm |
| Ancho (EF000008) | None mm |
| Color (EF000007) | |
| Altura (EF000040) | None mm |
| Beneficio: (Características) | Large enclosure configurations can be created and installed in areas where there is limited access space. The enclosure's doors can support heavy loads, such as, cooling units, due to its increased loading capability. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure. Stainless steel enclosures can be installed in almost any environment, grade dependent. |
| Comentario: (Características) | Stainless steel side panels, SPMS, need to be ordered separately, to close individual enclosures and enclosure assembly's, to ensure the stated protection degree is achieved. |
| Característica: (Características) | Stainless steel 304 and 316(L) double door combinable floor standing enclosures, with a IP 55 protection degree. |
| Material (EF002169) | |
| Acoplable (EF001229) | |
| Ventaja: (Características) | A flexible solution that allows customers to create enclosure configurations made up of smaller individual enclosures. The space required immediately in front of the enclosure is reduced due to the width of each enclosure door being half that of the enclosure. This also results in the door's loading capacity being higher, as it is split over two doors. The installed components inside the enclosure will be safe and secure due to the high protection degree. |
| Número RAL (EF000116) | |
| Puerta: (Datos técnicos) | Mounted with four hinges. Including door frame with 25 mm hole pattern. Doors cannot be reversed. Separate doors to be ordered for left hand door locking. |
| Versión EMC (EF001062) | |
| Cerradura: (Datos técnicos) | Espagnolette 4-point locking system in the main door and 2-point locking system in the slave door. Standard double-bit lock with 3 mm insert. Standard inserts, cylinders, lift handles and T-handle are available as accessories. |
| Modelo de esquina (EF020814) | |
| Marco: (Datos técnicos) | Seam welded reversed open profiles with 25 mm hole pattern, according to DIN 43660. |
| Independiente (EF020363) | |
| Techo inclinado (EF009278) | |
| Acabado: (Datos técnicos) | 400 pre-grained stainless steel. |
| Fijación de postes (EF009582) | |
| Con puerta trasera (EF007381) | |
| Entrega: (Datos técnicos) | Frame with fitted doors, rear panel, roof panel, bottom plates, mounting plate and door frame. Delivery also includes earthing bolts. Delivered on a pallet which is identical to the width of the enclosure to allow baying without removal. Packing material is recyclable. |
| Puesta a tierra: (Datos técnicos) | All panels are earthed through their fittings and are equipped with a separate earthing stud. |
| Resistencia al impacto (EF004293) | |
| Material: (Datos técnicos) | AISI 304L pre-grained stainless steel / AISI 316L. Frame: 1.5 mm. Door: 2 mm. Rear, roof and side panels: 1.5 mm. Bottom plates: 1.5 mm stainless steel. Mounting plate: 3 mm galvanized steel. |
| Número de puertas (EF000122) | |
| Número de cerraduras (EF000123) | |
| Calidad del material (EF001257) | |
| Con puerta de cristal (EF001089) | |
| Protección: (Datos técnicos) | Complies with IP 55 TYPE 12, 13 IK 10. |
| Panel trasero: (Datos técnicos) | Fitted by M6 torx screws. Standard facilities for rear door mounting. Split rear panels in 1600 mm wide enclosures. |
| Panel de techo: (Datos técnicos) | Removable. |
| Acabado de superficies (EF006569) | |
| Paneles laterales: (Datos técnicos) | Supplied as an accessory. |
| Con placa de montaje (EF000118) | |
| Placas inferiores: (Datos técnicos) | Two piece bottom plate in 1200 mm width, with injected polyurethane gasket to ensure maximum sealing. |
| Montaje intermedio (EF022994) | |
| Placa de montaje: (Datos técnicos) | Double folded and adjustable in depth by steps of 25 mm, with the MPD02 accessory. Mounting plate is delivered, attached on the outside of the enclosure packaging. |
| Con puerta de ventilación (EF006279) | |
| Grado de protección (IP) (EF005474) | |
| Modelo de pared de suelo (EF015208) | |
| Apto para empotrar en pared (EF007536) | |
| Adecuado para montaje en pared (EF000664) | |
| Grado de protección (NEMA) (EF011959) | |
| Requisitos de montaje: (Datos técnicos) | Standard delivery ready for combined installation. For stand-alone installation, add side panels. |
| Adecuado para montaje métrico (EF005823) | |
| Placa de montaje regulable en profundidad (EF006054) | |
| Carga máxima admisible de la(s) puerta(s) según IEC 62208 (EF014988) | None N |
| Carga máxima admisible de la carcasa según IEC 62208 (EF014987) | None N |
| Disipación térmica (Delta T = 20 K) según IEC/TR 60890 (EF014986) | None W |
| Carga máxima admisible de la placa de montaje según IEC 62208 (EF014989) | None N |
Descripción del producto
Self-supporting, 1800x1200x500, combinable, 2-door, with MP, stainless 304, IP55
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Detalles técnicos
Material:
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
