


| Parámetro | Valor |
|---|---|
| Artículo | Specifications |
| Tipo | Ultra low inertia |
| Eje | Key-way, center tap |
| Producto | Servo Motor |
| Características | Compact Servo Only for Position Control. |
| Sello de aceite | without |
| Recinto | IP65 |
| Masa (kg) | 0.96 |
| Número de pieza | MUMA022P1S |
| Nombre del producto | MINAS E series Servo Motor |
| Potencia nominal | 200 W |
| Freno de retención | without |
| Acerca del recinto | Except rotating portion of output shaft and leadwire end. |
| Par nominal (N ⋅ m) | 0.64 |
| Especificaciones de voltaje | 200 V |
| Corriente nominal (A (rms)) | 1.6 |
| Condiciones ambientales | For more details, please refer to the instruction manual. |
| Codificador rotatorio: Resolución | 10000 |
| Velocidad de rotación nominal (r/min) | 3000 |
| Codificador rotatorio: especificaciones | 2500 P/r Incremental |
| Acerca de la frecuencia del freno regenerativo | Note) 1. Regenerative brake frequency represents the frequency of the motor's stops from the rated speed with deceleration without load.⋅ If the load is connected, frequency will be defined as 1/( m + 1 ), where m = ( load moment of inertia ) / ( rotor moment of inertia ).⋅ When the motor speed exceeds the rated speed, regenerative brake frequency is in inverse proportion to the square of ( running speed / rated speed ).⋅ Power supply voltage is AC115 V ( at 100 V of the main voltage ). If the supply voltage fluctuates, frequency is in inverse proportion to the square of ( Running supply voltage /115 ) relative to the value in the table.⋅ When regeneration occurs continuosly such cases as running speed frequently changes or vertical feeding, consult us or a dealer.Note) 2. If the effective torque is within the rated torque, there is no limit in regenerative brake. |
| Velocidad máxima de rotación nominal (r/min) | 5000 |
| Par máximo momentáneo (N ⋅ m) | 1.91 |
| Frecuencia de frenado regenerativo (veces/min) | Without option :No limitWith option :No limitOption (External regenerative resistor) Part No. : DV0P2891 |
| Momento de inercia del rotor (x10-4kg ⋅ m²) | 0.10 |
| Relación recomendada del momento de inercia de la carga y el rotor | 30 times or less |
| Acerca de la relación recomendada del momento de inercia de la carga y el rotor | Note) 3. Consult us or a dealer if the load moment of inertia exceeds the specified value. |
Especificaciones técnicas y datos de rendimiento
Guía de instalación y operación