En stock Producto destacado
NPF-40-36
NPF-40-36 MEANWELL AC-DC Single output LED driver with Active PFC, Output 36VDC / 1.12A
$0.00USD
3927 en stock
Especificaciones clave
Nombre:NPF-40-36
Estado:Recommended Model
Formato:Box
Serie:NPF-40
Información del proveedor
MEANWELL
Productos: 6448
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Nombre | NPF-40-36 |
| Estado | Recommended Model |
| Formato | Box |
| Serie | NPF-40 |
| Aprobaciones | CCC, CE, ENEC, UL |
| Potencia (W) | 40,30 |
| Subformato | IP67 |
| Ancho (mm) | 53.00 |
| Altura (mm) | 35.00 |
| Entrada de CA Máx. | 305,00 |
| Entrada de CA mínima | 90,00 |
| Aplicaciones | Lighting |
| Fabricante | MEAN WELL |
| Tipo de producto | LED Driver |
| Aislamiento (V) | 3.750,00 |
| Potencia máxima (W) | 40.3 |
| Conector de entrada | Cable |
| Frecuencia de entrada | 50 Hz, 60 Hz |
| Largo/Fondo | 150.00 |
| Descripción larga | LED driver.Specially designed for powering LEDs directly in a steady stream.Format in box Waterproof plasticIP67Input range90-305Vca47-63HzOutput in constant current1120mA.Range of output voltage21.6 to 36Vccaccording to demade the load.Power:40,3 W.Efficiency typical:90%.Input class II without grounding.Factor corrector, power>0,95to 230vac at full load.Consumption without load <0,50 W.Operating temperature range of caseTcfrom-40ºCup+70ºC.Dimensions (Length x Width x Height):150 x 53 x 35mm5 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source can operate in either Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.You can also work in voltage mode constant giving a fixed voltage of 36V if the load is powered at constant voltage and does not overcome the maximum output power.With plastic housing, watertight, designed for lighting applications in indoor, decorative, architectural, signage, mobile (roads, screens...) or tunnel lighting. Suitable for damp and wet conditions. Approved HL Class I Division 2 for ex-zones in the US. |
| Conector de salida | Cable |
| Tipo de entrada CA | Single-phase |
| Garantía (años) | 5,00 |
| País natal | China |
| Corriente de salida mA | 1100, 1150 |
| Intensidad de salida mínima (mA) | 1.120,00 |
| Intensidad de salida máxima (mA) | 1.120,00 |
Descripción del producto
More details
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Detalles técnicos
LED driver.
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
