En stock Producto destacado
ODLC-65A-1050
ODLC-65A-1050 MEANWELL AC-DC Constant Current mode (CC) LED driver with PFC, Input range 180-295VAC, Output ..
$0.00USD
3619 en stock
Especificaciones clave
Nombre:ODLC-65A-1050
Estado:New
Formato:Box
Serie:ODLC-65A
Información del proveedor
MEANWELL
Productos: 6448
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Nombre | ODLC-65A-1050 |
| Estado | New |
| Formato | Box |
| Serie | ODLC-65A |
| Atenuación | 0-10V, 1-10V, PWM Signal 10V |
| Aprobaciones | CCC, CE, ENEC, UL |
| Potencia (W) | 65,10 |
| Subformato | IP67 |
| Ancho (mm) | 77.00 |
| Altura (mm) | 28.50 |
| Entrada de CA Máx. | 295,00 |
| Entrada de CA mínima | 180,00 |
| Aplicaciones | Lighting |
| Fabricante | MEAN WELL |
| Tipo de producto | LED Driver |
| Aislamiento (V) | 3.750,00 |
| Potencia máxima (W) | 65.1 |
| Conector de entrada | Cable |
| Frecuencia de entrada | 50 Hz, 60 Hz |
| Largo/Fondo | 121.00 |
| Descripción larga | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format in box waterproof plasticIP67.Input range180-295Vca47-63Hz.Output in constant current1050mA.Range of output voltage with current mode constant46 to 62Vccaccording to demand load.Power:65,1 W.Efficiency typical:86%.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10Vor a PWM signal of 10V with a frequency of 100Hz to 3KHz. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Input class II without grounding.Factor corrector, power>0.95to 230vac at full load.OutputAuxiliary 12V/50mA.Consumption without load <0.5 W.Operating temperature range of caseTcfrom-20ºCup+85ºC.Dimensions (Length x Width x Height):121 x 77 x 28.5 mm3 years of warranty.Manufacturer: MEAN WELL.The series ODLC are LED drivers designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream. The A version has an outputauxiliaryof12V/50mA.With plastic housing designed for lighting applications in interior and exterior. Low ripple current, no flicker (flicker-free).This source works on a Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.These sources can be dimmed with dimmers assets or liabilities of0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regular LED strips, we recommend the series ODLV or PWM.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Conector de salida | Cable |
| Tipo de entrada CA | Single-phase |
| Garantía (años) | 3,00 |
| País natal | China |
| Corriente de salida mA | One thousand fifty |
| Intensidad de salida mínima (mA) | 1.050,00 |
| Intensidad de salida máxima (mA) | 1.050,00 |
Descripción del producto
More details
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Detalles técnicos
LED driver dimmable.
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
