En stock Producto destacado
PLN-45-48
PLN-45-48 MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 48VDC / 0.95A, cable output, Enca..
$38.69USD
302 en stock
Especificaciones clave
Nombre:PLN-45-48
Formato:Box
Serie:PLN-45
Aprobaciones:CE, PSE, UL
Información del proveedor
MEANWELL
Productos: 6448
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Nombre | PLN-45-48 |
| Formato | Box |
| Serie | PLN-45 |
| Aprobaciones | CE, PSE, UL |
| Potencia (W) | 45,60 |
| Subformato | IP64 |
| Ancho (mm) | 61.50 |
| Altura (mm) | 35.00 |
| Entrada de CA Máx. | 295,00 |
| Entrada de CA mínima | 90,00 |
| Aplicaciones | Lighting |
| Fabricante | MEAN WELL |
| Tipo de producto | LED Driver |
| Aislamiento (V) | 3.750,00 |
| Potencia máxima (W) | 45.6 |
| Conector de entrada | Cable |
| Frecuencia de entrada | 50 Hz, 60 Hz |
| Largo/Fondo | 181.00 |
| Descripción larga | LED driver.Specially designed for powering LEDs directly in a steady stream.Format in plastic boxIP64.Input range90-295Vca47-63Hz.Output in constant current950mA.Adjustable by internal potentiometer SVR2 (3%-25%).Range of output voltage with current mode constant36 to 48vdcaccording to demand load.Output voltage with current mode constant48V.Adjustable by internal potentiometer SVR1 (43,6-51,8 Vcc).Power:To 45.6 W.Efficiency typical:87,5%.Potentiometers:This model incorporates 2 potentiometers inside that allows us to regulate the output voltage and the maximum output current.Input class I with grounding.Factor corrector, power>0,9to 230vac at full load.Operating temperature range of caseTcfrom-30ºCup+50ºC.Dimensions (Length x Width x Height):181 x 61.5 x 35mm.2 years of warranty.Manufacturer: MEAN WELL.The series PLN are LED Drvers designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source can operate in either Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current. The output voltage and the output current can be adjusted byknobs internal(SVR1 / SVR-2), located in the plate of the source.With plastic housing is isolated. A small and compact size makes it have high reliability and low cost. These sources are suitable for LED lighting and signalling mobile installations of interior and exterior. Suitable for wet environments and wet conditions. Burn test at 100% load. Complies with the requirements of security at the global level for lighting. |
| Conector de salida | Cable |
| Tipo de entrada CA | Single-phase |
| Garantía (años) | 2,00 |
| País natal | China |
| Corriente de salida mA | Nine hundred fifty |
| Intensidad de salida mínima (mA) | 950,00 |
| Intensidad de salida máxima (mA) | 950,00 |
Descripción del producto
More details
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Detalles técnicos
LED driver.
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
