En stock Producto destacado
PWM-120-12
PWM-120-12 MEANWELL AC-DC Single output LED driver Constant Voltage (CV), PWM output for LED strips, Output ..
$0.00USD
3228 en stock
Especificaciones clave
Nombre:PWM-120-12
Estado:High Turnover
Existencias:Yes
Formato:Box
Información del proveedor
MEANWELL
Productos: 6448
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Nombre | PWM-120-12 |
| Estado | High Turnover |
| Existencias | Yes |
| Formato | Box |
| Serie | PWM-120 |
| Atenuación | 0-10V, 1-10V, Resistance 0-100K, PWM Signal 10V |
| Aprobaciones | CCC, CE, ENEC, UL |
| Potencia (W) | 120,00 |
| Subformato | IP67 |
| Ancho (mm) | 63.00 |
| Altura (mm) | 37.50 |
| Entrada de CA Máx. | 305,00 |
| Entrada de CA mínima | 90,00 |
| Aplicaciones | Lighting |
| Fabricante | MEAN WELL |
| Tipo de producto | LED Driver |
| Aislamiento (V) | 3.750,00 |
| Voltaje de salida | 12,00 |
| Potencia máxima (W) | One hundred twenty |
| Conector de entrada | Cable |
| Frecuencia de entrada | 50 Hz, 60 Hz |
| Largo/Fondo | 191.00 |
| Descripción larga | LED driver dimmable.Specially designed for the regulation of LED strips.Format in box waterproof plasticIP67.Input range90-305Vca47-63HzOutput voltage12vdc.Output intensity10A. Range of output current 0-10A according to demand load.Power:120W.Efficiency typical:88%.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10V,a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Input class II without grounding.Factor corrector, power>0,96to 230vac at full load.Consumption without load <0.5 W.Operating temperature range of caseTcfrom-40ºCup+85ºC.Dimensions (Length x Width x Height):191 x 63 x 37.5 mm5 years of warranty.Manufacturer: MEAN WELL.The series PWM are LED Drivers designed to work directly with LED strips. Must be equipment that is fed at constant voltage. With plastic housing designed for lighting applications in indoor, decorative or architectural. Approved HL Class I Division 2 for ex-zones in the US.Can be adjusted by regulatory assets or liabilities0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output.The output pulse can be regular any LED strip by small, is always to not overcome the maximum load of the driver.To be the driver and the regulator are integrated on the same computer we remove any kind of incompatibility and reduce the cost, size. Design of high frequency avoids any problem of noise audible to any level of regulation.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Conector de salida | Cable |
| Tipo de entrada CA | Single-phase |
| Garantía (años) | 5,00 |
| País natal | China |
Descripción del producto
More details
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Detalles técnicos
LED driver dimmable.
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
