


| Parámetro | Valor |
|---|---|
| Admirador | Yes |
| Nombre | CPR-1000-24-C |
| Estado | Recommended Model |
| Alarmas | Over Temperature, mains Failure, Output OK |
| Formato | 19"Rack |
| Serie | RCP-1000-C |
| Aprobaciones | CE, UL |
| Interfaz | I2C, PMBus |
| Potencia (W) | 960,00 |
| Subformato | 1U |
| Ancho (mm) | 127.00 |
| Altura (mm) | 41.00 |
| Entrada de CA Máx. | 264,00 |
| Entrada de CA mínima | 90,00 |
| Aplicaciones | Industrial, Telecommunications |
| Fabricante | MEAN WELL |
| Tipo de producto | Power supply AC/DC |
| Aislamiento (V) | 3.000,00 |
| Voltaje de salida | 24,00 |
| Potencia máxima (W) | Nine hundred sixty |
| Conector de entrada | Pin |
| Frecuencia de entrada | 50 Hz, 60 Hz |
| Largo/Fondo | 295.00 |
| Descripción larga | Power supply for 19" Rack programmable via ITwoC.FormatRack 19".Range of universal input90-264vac.47-63Hz.Output voltage24vdc.Adjustable by potentiometer (23,2-24,8 Vdc) or by external resistance from 90% to 110%or configurable through I2C protocol.Output intensity40A. Range of output current 0-40A according to demand load.Power:960W.Efficiency typical:87%.Paralelizable up to 3 units with sharing of active current and diode mosfet protection in the Rack RCP-1U.Hot Swap. Change in hot.Factor corrector, power>0,97to 230vac at full load.Remote on / off.Auxiliary output and 5V 0.3 A.3-color LED charging status indicator.Working temperature: from-20up+60 ° Cof ambient temperature. Consult the technical data sheet to see the curves of drift.Dimensions (Length x Width x Height) [mm]:295 x 127 x 41.5 years of warranty.Manufacturer: MEAN WELL.The power supplies of the series RCP-1000 are designed to install in the Rack RCP-1U supports up to 3 sources CPR-1000. These sources allow you to configure the current through RTwoC. can Be connected in parallel up to 3 sources protected by a diode Mosfet for the protection of the current investment. They have a wide range of temperature from -20ºC up to +60ºC. The tension can also be adjusted via a potentiometer. Have a high efficiency and auxiliary output of 5V. The function Hot-Swap or hot-swap allows us to replace any damaged equipment without having to stop the system, or to increase the power at any time. |
| Conector de salida | Screw-Type |
| Tipo de entrada CA | Single-phase |
| Garantía (años) | 5,00 |
| País natal | Taiwan |
Especificaciones técnicas y datos de rendimiento
Guía de instalación y operación