


| Parámetro | Valor |
|---|---|
| Nombre | RSD-150C-12 |
| Estado | Recommended Model |
| Formato | Box |
| Serie | RSD-150 |
| Aprobaciones | EC |
| Potencia (W) | 150,00 |
| Subformato | IP20 |
| Ancho (mm) | 77.00 |
| Altura (mm) | 36.00 |
| Rango de entrada | 2:1 |
| Aplicaciones | Railway, Industrial, Telecommunications |
| Entrada de CC máx. | 62,40 |
| Entrada de CC mínima | 33,60 |
| Fabricante | MEAN WELL |
| Tipo de producto | Dc/DC converters |
| Aislamiento (V) | 4.000,00 |
| Voltaje de salida | 12,00 |
| Potencia máxima (W) | One hundred fifty |
| Rango de entrada de CC | 33,6, 35, 36, 36,4, 38,4, 40, 43, 46,8, 50, 50,4, 52, 56, 60, 62,4 |
| Conector de entrada | Screw-Type |
| Largo/Fondo | 189.00 |
| Descripción larga | Dc/DC converter rail is a regulated isolated output.Converter for railway applications, industrial or telecommunications.Input range33,6-62,4 Vcc(28,8-67,2 Vdc for 1 second). Range rail to 48V input.Output voltage12vdc.Output intensity:12,5 A.Power:150W.Isolation input-output 4000Vcc.Efficiency of the92%.Operating temperature from-40up+70 ° C(see the curve derived in the technical data sheet). 85 ° c for 10 minutes with ventilation by conduction.Dimensions (Length x Width x Height):189 x 77 x 36mm.3 years of warranty.Manufacturer: MEAN WELL.It is a converter designed for railway applications, industrial or telecommunications.Is certified with the regulations for railway EN50155 and EN45545-2 in front of the fire.Can operate up to 55C at full load and 70 ° C at 60% load or 70 ° C ambient temperature with ventilation by driving without losses. Also supports a temperature range of more demanding level rail Tx to 85ºC ambient temperature for 10 minutes with ventilation by driving on a metal surface.This converter semi-encapsulation has been designed for the most demanding applications at the level of vibration, temperature, and humidity. Has a low profile of only 36mm and uses only components prepared for high temperatures as for example capacitors of 105ºC.It has a low noise and ripple, and high efficiency and is protected against reverse polarity at the input. The inrush current is limited by a resistor in series with a MOSFET to reduce the peak starting current to reliably regardless of the ambient temperature.Its output is protected against short-circuits and overloads by limiting output current, this allows you to start loads with a high inrush. |
| Conector de salida | Screw-Type |
| Garantía (años) | 3,00 |
| País natal | Taiwan |
Especificaciones técnicas y datos de rendimiento
Guía de instalación y operación