


| Parámetro | Valor |
|---|---|
| Artículo | Specifications |
| Cable | 0.2 mm23-core (emitter: 2-core) cabtyre cable, 2 m6.562 ftlong |
| Producción | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current) |
| Peso | Net weight: 95 g approx.Gross weight: 100 g approx. |
| Detalles | Thru-beam(Long sensing range) |
| Producto | Compact Photoelectric Sensor |
| Material | Enclosure: PBT (polybutylene terephthalate)Lens: acrylicIndicator cover: acrylic |
| Accesorio | - |
| Histéresis | - |
| Protección | IP67 (IEC) |
| Número de pieza | CX-413-P |
| Nombre del producto | Compact Photoelectric Sensor CX-400 Ver.2 |
| Tiempo de respuesta | 2 ms or less |
| Rango de detección | 30 m98.425 ft |
| Número de producto | CX-413-P |
| Objeto de detección | Ø12 mmØ0.472 inor more opaque object(Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in(using round slit mask) can be detected. |
| Tensión de alimentación | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Extensión de cable | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable (both emitter and receiver). |
| Indicador de encendido | Green LED(lights up when the power is ON)(incorporated on the emitter) |
| Humedad ambiental | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Resistencia a los golpes | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Iluminancia ambiental | Incandescent light: 3,000 lx or less at the light-receiving face |
| Temperatura ambiente | - 25 to +55℃-13 to +131℃ ℉(No dew condensation or icing allowed ), Storage: -30 to +70℃-22 to +158℃ ℉ |
| Consumo actual | Emitter: 25 mA or lessReceiver: 10 mA or less |
| Indicador de funcionamiento | Orange LED(lights up when the output is ON)(incorporated on the receiver for thru-beam type) |
| Indicador de estabilidad | Green LED(lights up under stable light received condition or stable dark condition)(incorporated on the receiver for thru-beam type) |
| Ajustador de sensibilidad | Continuously variable adjuster(incorporated on the receiver for thru-beam type) |
| Resistencia a la vibración | 10 to 500 Hz frequency, 1.5 mm0.059 inamplitude (10 G max.) in X, Y and Z directions for two hours each |
| Resistencia de aislamiento | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Salida:Operación de salida | Switchable either Light-ON or Dark-ON |
| Soportabilidad de tensión | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Elemento emisor (modulado) | Infrared LED |
| Salida: Protección contra cortocircuitos | Incorporated |
| Normativas y certificaciones aplicables | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Función automática de prevención de interferencias | - |
| Repetibilidad (perpendicular al eje de detección) | 0.5 mm0.020 inor less |
| Elemento emisor (modulado):Longitud de onda de emisión máxima | 850 nm0.033 mil |
Especificaciones técnicas y datos de rendimiento
Guía de instalación y operación