En stock Producto destacado
UERX001
UERX001 ER-X001 PANASONIC Wide-area, high speed ionizer-head, spot type, charge removal time 1sec, ion balan..
$0.00USD
3518 en stock
Especificaciones clave
Artículo:Specifications
Peso:Net weight : 370 g approx.
Detalles:Head
Producto:Pulse AC Method Area Ionizer
Información del proveedor
PANASONIC
Productos: 4316
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Artículo | Specifications |
| Peso | Net weight : 370 g approx. |
| Detalles | Head |
| Producto | Pulse AC Method Area Ionizer |
| Material | Main unit enclosure: Stainless steal (SUS)Head mounting bracket: Stainless steal (SUS)Discharge needle: PFA, Tungsten |
| Accesorios | Head mounting bracket (installed at the time of factory shipment) |
| equilibrio iónico | ±30 V or less(Note 1：Typical value in condition of discharge distance 100 mm3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)(Note 2： Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature change is less than ±10 ℃, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.) |
| Número de pieza | ER-X001 |
| Nombre del producto | Pulse AC Method Area Ionizer ER-X |
| Número de producto | ER-X001 |
| Humedad ambiental | 35 to 65 % RH, Storage: 35 to 85 % RH |
| Fluido aplicable | Air (dried clean air)(Note：The dried clean air is the air dried (dew point: equivalent of -20 ℃-4 ℉) and filtered (mesh-size: equivalent of 0.01 μm) .) |
| Método de descarga | Pulse AC method(Note：The discharge frequencies of 50 Hz, 20 Hz are accepted.) |
| Generación de ozono | 0.01 ppm or less(Note：Typical value in condition of discharge distance 50 mm1.969 in, center of the product, discharge wavelength 50 Hz and no air supply.) |
| Resistencia a los golpes | 100 m/s2acceleration (10 G approx.), in X, Y and Z directions three times each |
| Puesta a tierra del envolvente | Floating |
| Altitud de operación | 2,000 m6561.68 ftor less(Note：Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.) |
| Temperatura ambiente | 0 to +40 ℃+32 to +104 ℉(No dew condensation), Storage: -10 to +65℃+14 to +149℉ |
| Tiempo de eliminación de carga | 0.3 sec. or less (Note 1), 0.5 sec. or less (Note 2)(Note 1： Typical value in condition of discharge distance 50 mm1.969 in, center of the product, discharge wavelength 50 Hz and air supply 60 ℓ / min. (0.3 MPa)) .(Note 2： Typical value in condition of discharge distance 50 mm1.969 in, center of the product, discharge wavelength 50 Hz and no air supply.) |
| Frecuencia de descarga | 50 Hz / 20 Hz |
| Presión máxima de aire | 0.5 MPa |
| Resistencia a la vibración | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Normativa aplicable | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), TÜV SÜD certification (USA, Canada) |
| Voltaje de salida de descarga | ±7,000 V approx. |
| Longitud del cable de alta tensión | 1.2 m3.937 ft |
| Ancho efectivo de eliminación de carga | 50 mm1.969 inapprox. |
Descripción del producto
ER-X ionizer, wide area, high speed, spot spot, charge removal time < 1sec, ion balance max. ± 30V, voltage discharge output approx. 7kV
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
