En stock Producto destacado
UERX032
UERX032 ER-X032 PANASONIC Wide-area, high speed ionizer-head, bar type, removal width 320mm, charge removal ..
$0.00USD
4153 en stock
Especificaciones clave
Artículo:Specifications
Peso:Net weight : 530 g approx.
Detalles:Head
Producto:Pulse AC Method Area Ionizer
Información del proveedor
PANASONIC
Productos: 4316
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Artículo | Specifications |
| Peso | Net weight : 530 g approx. |
| Detalles | Head |
| Producto | Pulse AC Method Area Ionizer |
| Material | Main unit enclosure: PPS, Stainless steal (SUS)Head mounting bracket: Stainless steal (SUS), Discharge needle: Tungsten |
| equilibrio iónico | plus or minus 30 V or less(Note： In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.)(Note： Ion balance is average of plus and minus. Also, the specification value is typical value in condition of less than plus or minus 10 degrees ambient temperature change, set the ion balance after 30 minutes of the discharge starting, switching on the ion balance control function.) |
| Número de pieza | ER-X032 |
| Nombre del producto | Pulse AC Method Area Ionizer ER-X |
| Número de producto | ER-X032 |
| Humedad ambiental | 35 to 65 % RH, Storage: 35 to 85 % RH |
| Fluido aplicable | Air (dried clean air)(Note:The dried clean air is dried (dew point: equivalent of -20 ℃) and filtered (mesh-size: equivalent of 0.01 micro m) air.) |
| Método de descarga | Pulse AC method |
| Generación de ozono | 0.01 ppm or less |
| Resistencia a los golpes | 100 m/s2 acceleration (10 G approx.), in X, Y and Z directions three times each |
| Puesta a tierra del envolvente | Floating |
| Altitud de operación | 2,000 m6561.68 ftor less(Note：Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.) |
| Temperatura ambiente | 0 to +50 °C +32 to +122 °F (No dew condensation), Storage: -10 to +65 °C +14 to +149 °F |
| Tiempo de eliminación de carga | 1 second or less(Note： In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.) |
| Frecuencia de descarga | 100 Hz / 70 Hz / 50 Hz / 30 Hz / 20 Hz / 10 Hz / 5 Hz / 1 Hz(Note：The high-voltage cable is also available in lengths of 1 m3.281 ftand 2 m6.562 ft. The discharge frequency of 1 m3.281 ft/ 2 m6.562 ftcables is 50 / 30 / 20 / 10 / 5 / 1 Hz. For details, please contact our sales office.) |
| Presión máxima de aire | 0.5 Mpa |
| Resistencia a la vibración | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Normativa aplicable | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), TÜV SÜD certification (USA, Canada) |
| Voltaje de salida de descarga | ±7,000 V approx. |
| Longitud del cable de alta tensión | 0.5 m1.640 ft(Note：The high-voltage cable is also available in lengths of 1 m3.281 ftand 2 m6.562 ft. The discharge frequency of 1 m3.281 ft/ 2 m6.562 ftcables is 50 / 30 / 20 / 10 / 5 / 1 Hz. For details, please contact our sales office.) |
| Ancho efectivo de eliminación de carga | 320 mm 12.598 in approx. |
Descripción del producto
ER-X ionizer, wide area, high speed, array type, removal area 320mm., charge removal time < 1sec, ion balance max. ± 30V, voltage discharge output approx. 7kV
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
