En stock Producto destacado
UEXF1
UEXF1 EXF1 EX-F1 PANASONIC Pipe mountable liquid level sensor, NPN, 12-24 V DC
$0.00USD
4826 en stock
Especificaciones clave
Artículo:Specifications
Cable:0.1 mm2 3-core cabtyre cable, 1 m 3.281 ft long
Producción:NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Peso:Net weight: 15 g approx., Gross weight: 60 g approx.
Información del proveedor
PANASONIC
Productos: 4316
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Artículo | Specifications |
| Cable | 0.1 mm2 3-core cabtyre cable, 1 m 3.281 ft long |
| Producción | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Peso | Net weight: 15 g approx., Gross weight: 60 g approx. |
| Detalles | Amplifier built-in, Pipe-mountable |
| Producto | Pipe-mountable Liquid Level Detection Sensor |
| Material | Enclosure: Polycarbonate, Tying band: Nylon, Anti-slip tube: Silicone |
| Accesorio | Tying band: 2 pcs., Anti-slip tube: 2 pcs. |
| Número de pieza | EX-F1 |
| Nombre del producto | Pipe-mountable Liquid Level Detection Sensor EX-F1 |
| Tiempo de respuesta | 2 ms or less |
| Número de producto | EX-F1 |
| Objeto de detección | Liquid(Note):Unclear or highly viscous liquid may not be detected stably. |
| Tensión de alimentación | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| Extensión de cable | Extension up to total 50 m164.042 ftis possible with 0.3 mm2, or more, cable. |
| Humedad ambiental | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Elemento emisor | Infrared LED (modulated) |
| Resistencia a los golpes | 100 m/s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| Iluminancia ambiental | lncandescent light: 3,000 lx or less at the light-receiving face |
| Temperatura ambiente | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: -20 to +70 ℃-4 to +158 ℉(Note：Liquid being detected should also be kept within the rated ambient temperature range.) |
| Consumo actual | 30 mA or less(Note：Unclear or highly viscous liquid may not be detected stably.) |
| Indicador de funcionamiento | Red LED (lights up when the output is ON) |
| Resistencia a la vibración | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Resistencia de aislamiento | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Salida:Operación de salida | Switchable either Light-ON (Liquid-absent-ON) or Dark-ON (Liquid-present-ON) |
| Diámetro de tubería aplicable | Outer dia. ø6 to ø13 mm ø0.236 to ø0.512 in transparent resin pipe[PFA (Fluorine resin) or equivalently transparent pipe, wall thickness 1 mm 0.039 in ](Note：Do not use the sensor with pipes other than the above specified.) |
| Soportabilidad de tensión | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Cumplimiento de la directiva de marcado CE | EMC Directive, RoHS Directive |
| Salida: Protección contra cortocircuitos | Incorporated |
Descripción del producto
Sensor for liquid level in transparent tubes, between 6 and 13mm Ø, built-in amplifier, NPN, selectable Light-On/Dark-ON, 12-24 V DC
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
