En stock Producto destacado
UEXZ12FAP
UEXZ12FAP EX-Z12FA-P PANASONIC Thru beam, 200mm, front sensing, Light-ON, PNP, cable 2m
$0.00USD
3395 en stock
Especificaciones clave
Artículo:Specifications
Cable:0.1 mm23-core (emitter: 2-core) cabtyre cable, 2 m6.562 ftlongNote:The bending-resistant cable type has a 0.1 mm23-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m6.562 ftlong.
Producción:PNP open-collector transistor- Maximum source current: 20 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1.5 V or less (at 20 mA source current)
Observación:Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃73 ℉.
Información del proveedor
PANASONIC
Productos: 4316
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Artículo | Specifications |
| Cable | 0.1 mm23-core (emitter: 2-core) cabtyre cable, 2 m6.562 ftlongNote:The bending-resistant cable type has a 0.1 mm23-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m6.562 ftlong. |
| Producción | PNP open-collector transistor- Maximum source current: 20 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1.5 V or less (at 20 mA source current) |
| Observación | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃73 ℉. |
| Peso | Net weight (each emitter and receiver) : 15 g approx.Gross weight: 35 g approx. |
| Detalles | Thru-beam [Front sensing] |
| Producto | Ultra-minute Photoelectric Sensor |
| Material | Enclosure: PBTLens: PolycarbonateMetallic part: Stainless steel (SUS304)(SUS301 for rear side of front sensing type) |
| Accesorio | M2 mounting screws: 1 set (front sensing type: 6 mm0.236 inin length; side sensing type: 10 mm0.394 inin length) |
| Toma de tierra | Floating |
| Protección | IP67 (IEC) |
| Número de pieza | EX-Z12FA-P |
| Nombre del producto | Ultra-minute Photoelectric Sensor EX-Z |
| Tiempo de respuesta | 0.5 ms or less |
| Rango de detección | 200 mm7.874 in |
| Número de producto | EX-Z12FA-P |
| Tensión de alimentación | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Extensión de cable | Extension up to total 50 m164 ftis possible with 0.3 mm2, or more, cable (both emitter and receiver) . |
| Humedad ambiental | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Elemento emisor | Red LED (Peak emission wavelength: 650 nm0.026 mil, modulated) |
| Operación de salida | Light-ON |
| Resistencia a los golpes | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions for three times each |
| Iluminancia ambiental | Incandescent light: 5,000 ℓx at the light-receiving face |
| Temperatura ambiente | -10 to +55 ℃14 to +131 ℉(No dew condensation or icing allowed), Storage: -30 to +70 ℃-22 to +158 ℉ |
| Consumo actual | Emitter: 10 mA or lessReceiver: 10 mA or less |
| Mínimo objeto detectado | ø0.5 mmø0.02 inopaque object (Completely beam interrupted object)(Setting distance between emitter and receiver: 200 mm7.874 in) |
| Indicador de funcionamiento | Orange LED (Lights up when the sensing output is ON) |
| Indicador de estabilidad | Green LED (Lights up under the stable light received condition or the stable dark condition) |
| Resistencia a la vibración | 10 to 500 Hz frequency, 3 mm0.118 inamplitude in X, Y and Z directions for two hours each |
| Resistencia de aislamiento | 20 MΩ or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Soportabilidad de tensión | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Salida: Protección contra cortocircuitos | Incorporated |
| Normativas y certificaciones aplicables | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL/c-UL Certification |
| Repetibilidad (perpendicular al eje de detección) | 0.03 mm0.001 inor less |
Descripción del producto
Ultra-miniature and ultra-compact photoelectric sensor. Barrier, reach 200mm, front detection, light operation, PNP, cable 2m, dimensions 8 x 12 x 3 mm.
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
