En stock Producto destacado
UHGC1400P
UHGC1400P HG-C1400-P PANASONIC Compact Laser Displacement Sensor, 400mm+/-200mm PNP, 0-5V/4-20mA, cable 2m
$0.00USD
4200 en stock
Especificaciones clave
Artículo:Specifications
Cable:5-core composite cable, 2 m6.5617 ftlong
Peso:Net weight: 35 g approx. (without cable), 85 g approx. (including cable)
Detalles:Measurement center 400mm 15.748 in type
Información del proveedor
PANASONIC
Productos: 4316
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Artículo | Specifications |
| Cable | 5-core composite cable, 2 m6.5617 ftlong |
| Peso | Net weight: 35 g approx. (without cable), 85 g approx. (including cable) |
| Detalles | Measurement center 400mm 15.748 in type |
| Producto | CMOS type Micro Laser Distance Sensor |
| Material | Enclosure: Aluminum die-castFront cover: Acrylic |
| Linealidad | ±0.2 % F.S. (Measuring distance 200 to 400 mm7.874 to 15.748 in)±0.3 % F.S. (Measuring distance 400 to 600 mm15.748 to 23.622 in) |
| Protección | IP67 (IEC) |
| Número de pieza | HG-C1400-P |
| Fuente de luz | Red semiconductor laser Class 2 [IEC / EN/ JIS / GB / KS / FDA (Note) ]Max. output: 1 mWemission peak wavelength: 655 nm0.026 mil(Note) This product complies with the FDA regulations (FDA 21 CFR 1040.10 and 1040.11) in accordance with FDA Laser Notice No. 56, except for complying with IEC 60825-1 Ed. 3. |
| Nombre del producto | CMOS type Micro Laser Distance Sensor HG-C |
| Diámetro de la viga | ø500 μm19.6851 milapprox.(Note) This is the size in the measurement center distance. These values were defined by using 1/e2(13.5% approx.) of the center light intensity. Due to leak light outside the specified area, the reflectance around the detecting point may be higher than at the point and this may affect the measurement value. |
| Repetibilidad | 300 μm11.811 mil(Measuring distance 200 to 400 mm7.874 to 15.748 in)800 μm31.496 mil(Measuring distance 400 to 600 mm15.748 to 23.622 in) |
| Tiempo de respuesta | Switchable between 1.5 ms / 5 ms / 10 ms |
| Salida de control | PNP open-collector transistor- Maximum source current: 50 mA- Applied voltage: 30 V DC or less (Between control output to +V)- Residual voltage: 1.5 V or less (At 50 mA source current)- Leakage current: 0.1 mA or less |
| Entrada externa | PNP non-contact input- Input conditionsInvalid: 0 to +0.6 V DC or OpenValid: +4 to +V DC- Input impedance: 10 kΩ approx. |
| Número de producto | HG-C1400-P |
| Tensión de alimentación | 12 to 24 V DC ±10 %, Ripple P-P 10 % or less |
| Extensión de cable | Extension up to total 10 m393.701 ftis possible with 0.3 mm2, or more, cable. |
| Rango de medición | ±200 mm7.874 in |
| Humedad ambiental | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Grado de contaminación | 2 |
| Resistencia a los golpes | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Altitud de operación | 2,000 m6561.680 ftor less |
| Iluminancia ambiental | Incandescent light: 3,000 ℓx or less at the light-receiving face |
| Temperatura ambiente | -10 to +45 ℃-14 to 113 ℉(No dew condensation or icing allowed), Storage: -20 to +60 ℃-4 to 140 ℉ |
| Consumo actual | 40 mA or less (at 24V DC supply voltage)65 mA or less (at 12V DC supply voltage)Note : Specifications have been changed from shipment in August, 2016. For shipment before July 2016 ： 40 mA or less (at 24 V DC supply voltage), 60 mA or less (at 12 V DC supply voltage) |
| Resistencia a la vibración | 10 to 55 Hz (period: 1 min.) frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Distancia del centro de medición | 400 mm15.748 in |
| Características de temperatura | 0.03% F.S./℃ |
| Salida de control: Operación de salida | Either Light-ON or Dark-ON |
| Salida analógica: Salida de corriente analógica | • Output range: 4 to 20mA (at alarm: 0mA)• Output impedance: 300Ω or lessNote : Analog current output has been added from shipment in August 2016. |
| Salida analógica: Salida de tensión analógica | • Output range: 0 to 5 V (at alarm: +5.2 V)• Output impedance: 100Ω |
| Salida de control: Protección contra cortocircuitos | Incorporated (Auto reset type) |
| Normativas y certificaciones aplicables | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), FDA Regulations, UL/c-UL Certification(Note) : The UL/c-UL certified products have been shipped since April, 2017. |
Descripción del producto
Micro Displacement Laser Sensor, measurement range 400mm. ± 200mm., repeatability 300μm. (from 200 to 300mm distance) and 800μm. (from 400 to 600mm distance), beam diameter approx. 500μm., PNP digital
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
