En stock Producto destacado
ULS401PC2
ULS401PC2 LS401PC2 LS-401P-C2 PANASONIC Laser Amplifier (with display), cable 2m, 2 outputs PNP
$0.00USD
3563 en stock
Especificaciones clave
Artículo:Specifications
Cable:0.15 mm25-core cabtyre cable, 2 m6.562 ftlong
Peso:Net weight: 65 g approxGross weight: 75 g approx
Detalles:Amplifier (Cable type)
Información del proveedor
PANASONIC
Productos: 4316
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Artículo | Specifications |
| Cable | 0.15 mm25-core cabtyre cable, 2 m6.562 ftlong |
| Peso | Net weight: 65 g approxGross weight: 75 g approx |
| Detalles | Amplifier (Cable type) |
| Producto | Digital Laser Sensor |
| Material | Enclosure: Heat-resistant ABSTransparent cover: PolycarbonatePush button switch: AcrylicJog switch: ABS |
| Número de pieza | LS-401P-C2 |
| Nombre del producto | Digital Laser Sensor LS-400 |
| Tiempo de respuesta | 80 micro s or less (H-SP), 150 micro s or less (FAST), 500 micro s or less (STD), 4 ms or less (U-LG) selectable with jog switch |
| Indicador MODE | RUN: Green LEDTEACH, L/D, TIMER, CUST, PRO: Yellow LED |
| Número de producto | LS-401P-C2 |
| Tensión de alimentación | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Función de temporizador | Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective. |
| Extensión de cable | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| Pantalla digital | 4 digit (green) + 4 digit (red) LED display |
| Humedad ambiental | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Seleccionar indicador | Yellow LED(lights up when either output 1 or output 2 is selected) |
| Resistencia a los golpes | 98 m/s2acceleration (10 G approx.) in X, Y and Z directions five times each |
| Temperatura ambiente | -10 to +55 ℃+14 to +131 ℉(If 4 to 7 units are mounted close together: -10 to +50 ℃+14 to +122 ℉, if 8 to 16 units are mounted close together: -10 to +45 ℃+14 to +113 ℉)(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉ |
| Consumo actual | Normal operation: 950 mW or less (Current consumption 40 mA or less at 24 V supply voltage)ECO mode: 780 mW or less (Current consumption 33 mA or less at 24 V supply voltage) |
| Indicador de funcionamiento | Orange LED (lights up when output 1 and output 2 are ON) |
| Ajuste de sensibilidad | Normal mode: 2-level teaching / Limit teaching / Full-auto teaching / Manual adjustmentWindow comparator mode: Teaching (1-level, 2-level, 3-level) / Manual adjustmentHysteresis mode: Teaching (1-level, 2-level, 3-level) / Manual adjustmentDifferential mode: 5-level settings |
| Función de temporizador:Tiempo | 1 to 9,999 ms |
| Resistencia a la vibración | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Resistencia de aislamiento | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Indicador de emisión láser | Green LED (lights up during laser emission) |
| Soportabilidad de tensión | 1,000 V AC for one min.between all supply terminals connected together and enclosure |
| Salidas (Salida 1, Salida 2) | PNP open-collector transistor- Maximum source current: 100 mA (Note)- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1.5 V or less [at 100 mA (Note) source current](Note) 50 mA if 5 to 8 connector type amplifiers are connected in cascade , and 25 mA if 9 to 16 connector type amplifiers are connected in cascade. |
| Función de ajuste fino de sensibilidad | Incorporated |
| Función de prevención automática de interferencias | Incorporated[Up to four sets of sensor heads can be mounted close together. (However, disabled when in H-SP mode)] |
| Salidas (Salida 1, Salida 2): Operación de salida | Selectable either Light-ON or Dark-ON, with jog switch |
| Salidas (Salida 1, Salida 2): Protección contra cortocircuitos | Incorporated |
| Entrada externa (detención de emisión láser, enseñanza totalmente automática/enseñanza limitada) | PNP non-contact input- Signal conditionHigh: +4 V to +V DC (sink current 3 mA or less), Low: 0 to +0.6 V DC or open- Input impedance: 10 kOhm approx. |
Descripción del producto
LS400 series digital laser amplifier, PNP, cable
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
