

| Parámetro | Valor |
|---|---|
| Profundidad | 146 mm |
| Ancho | 61 mm |
| Altura | 126 mm |
| Altitud | ≤ 2000 m |
| Aislamiento | Reinforced insulation |
| Tipo de producto | Relay Module |
| Tipo de montaje | DIN rail mounting |
| Con componentes | yes |
| Grado de contaminación | 2 |
| Método de conexión | IDC/FLK pin strip |
| Posición de montaje | any |
| Notas sobre el funcionamiento | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| Número de puestos | 14 |
| Tensión de sobretensión nominal | 6 kV (1.2/50 μs) |
| Grado de protección | IP00 |
| Categoría de sobretensión | III |
| Número de conexiones | 1 |
| Normas/regulaciones | DIN EN 50178: 1998-04 |
| Tipo de conmutación de contacto | Single contact, 1 changeover contact |
| Tensión nominal de entrada UN | 24 V DC (±10 %) |
| Tensión de aislamiento nominal | 260 V |
| Tensión máxima de conmutación | 150 V AC/DC (Maximum switching voltage of 230 V AC: the maximum switching voltage of 230 V is only permitted if the same fuse circuit is used. The outputs are not suitable for switching different outer conductors.) |
| Sección transversal del conductor AWG | 24 ... 12 |
| Limitación de la corriente continua | 4 A |
| Corriente de entrada típica en UN | 200 mA (200 mA supply / ≤ 20 mA input current per signal) |
| Sección transversal del conductor rígido | 0.2 mm² ... 2.5 mm² |
| Temperatura ambiente (funcionamiento) | -20 °C ... 50 °C |
| Sección transversal del conductor flexible | 0.2 mm² ... 2.5 mm² |
| Conexión según norma | IEC 60603-13 |
| Grado de protección (Ubicación de la instalación) | ≥ IP54 (Installation location) |
Especificaciones técnicas y datos de rendimiento
Guía de instalación y operación