En stock Producto destacado
UNA111-T
UNA111-T NA111 NA1-11 PANASONIC Cross-beam area sensor, 1m sensing range, 12-24V DC, NPN
$0.00USD
4423 en stock
Especificaciones clave
Artículo:Specifications
Cable:0.3 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong
Producción:NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Peso:Net weight: Emitter 80 g approx., Receiver 85 g approxGross Weight: 210 g approx.
Información del proveedor
PANASONIC
Productos: 4316
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Artículo | Specifications |
| Cable | 0.3 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong |
| Producción | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Peso | Net weight: Emitter 80 g approx., Receiver 85 g approxGross Weight: 210 g approx. |
| Detalles | NPN output |
| Producto | Small / Slim Object Detection Area Sensor |
| Material | Enclosure: Heat-resistant ABSLens: AcrylicIndicator cover: Acrylic |
| Protección | IP62 (IEC) |
| Número de pieza | NA1-11 |
| Nombre del producto | Small / Slim Object Detection Area Sensor NA1-11 |
| Paso del elemento | 10 mm0.394 in |
| Tiempo de respuesta | In Dark state: 5 ms or lessIn Light state: 10 ms or less |
| Rango de detección | 0.17 to 1 m0.558 to 3.281 ft(Note：The sensing range is the possible setting distance between the emitter and the receiver. The sensor can detect an object less than 0.17 m 0.558 ft away.) |
| Número de producto | NA1-11 |
| Altura de detección | 100 mm3.937 in |
| Objeto de detección | ø13.5 mmø0.531 inor more opaque object(Note：Although this product can detect slim objects by using the cross-beam scanning system, the size of the slim object which can be stably detected differs with the setting distance. When this sensor is used to detect slim objects, make sure to confirm stable detection using the actual objects.) |
| Tensión de alimentación | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Extensión de cable | Extension up to total 100 m 328.084 ft is possible, for both emitter and receiver, with 0.3 mm2, or more, cable. |
| Humedad ambiental | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Elemento emisor | Infrared LED (Peak emission wavelength: 880nm0.035mil, cross-beam scanning system) |
| Grado de contaminación | 3 (Industrial environment) |
| Resistencia a los golpes | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Indicadores: Emisor | Power indicator: Green LED (lights up when the power is ON)Large indicator: Orange LED (lights up or blinks when the large indicator input is Low, lighting pattern is selected by operation mode switch) |
| Iluminancia ambiental | Incandescent light: 3,000 lx or less at the light-receiving face |
| Temperatura ambiente | -10 to 55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉ |
| Consumo actual | Emitter: 80 mA or lessReceiver: 100 mA or less |
| Indicadores: Receptor | Operation indicator: Orange LED (lights up when the output is ON)Power indicator: Green LED (lights up when the power is ON)Large indicator: Orange LED (lights up or blinks when the large indicator input is Low, lighting pattern is selected by operation mode switch) |
| Resistencia a la vibración | 10 to 150 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Resistencia de aislamiento | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Salida:Operación de salida | ON or OFF when beam channel is interrupted, selectable by operation mode switch |
| Soportabilidad de tensión | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Salida:Categoría de utilización | DC-12 or DC-13 |
| Cumplimiento de la directiva de marcado CE | EMC Directive, RoHS Directive |
| Salida: Protección contra cortocircuitos | Incorporated |
| Número de elementos emisores/receptores | 11 Nos. each on the emitter and the receiver, respectively |
Descripción del producto
Crossbeam area sensor, detection range 1 meter, 12-24 VDC, NPN
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
