


| Parámetro | Valor |
|---|---|
| Artículo | Specifications |
| Cable | 0.2 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong |
| Producción | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) |
| Detalles | PNP output |
| Producto | Compact Size Picking Sensor |
| Material | Enclosure: Heat-resistant ABSLens cover: AcrylicIndicator cover: Acrylic |
| Paso de viga | 24.6 mm 0.969 in |
| Protección | IP62 (IEC) |
| Número de pieza | NA1-PK3-PN-J |
| Nombre del producto | Compact Size Picking Sensor NA1-PK3 |
| Tiempo de respuesta | 10 ms or less (when interference prevention function is used: 30 ms or less) |
| Rango de detección | 30 to 300 mm1.181 to 11.811 in(Note) The sensing range is the possible setting distance between the emitter and the receiver. |
| Número de producto | NA1-PK3-PN-J |
| Altura de detección | 49.2 mm1.937 in |
| Objeto de detección | ø29 mmø1.142 inor more opaque object(completely beam interrupted object) |
| Tensión de alimentación | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Extensión de cable | Extension up to total 100 m328.084 ftis possible for both emitter and receiver with 0.3 mm2, or more, cable. |
| Humedad ambiental | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Elemento emisor | Infrared LED (synchronized scanning system) |
| Grado de contaminación | 3 (Industrial environment) |
| Resistencia a los golpes | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Indicadores: Emisor | Power indicator: Green LED (lights up when the power is ON)Job indicator: Orange LED (lights up when the job indicator input is High) |
| Iluminancia ambiental | Incandescent light: 3,000 lx or less at the light-receiving face |
| Temperatura ambiente | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉ |
| Consumo actual | Emitter: 30 mA or lessReceiver: 50 mA or less |
| Indicadores: Receptor | Operation indicator: Red LED (lights up when the output is ON)Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)Job indicator: Orange LED (lights up when the job indicator input is High) |
| Resistencia a la vibración | 10 to 150 Hz frequency, 0.75 mm0.030 in(5 G max.) double amplitude in X, Y and Z directions for two hours each |
| Resistencia de aislamiento | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Número de canales de haz | 3 beam channels |
| Salida:Operación de salida | ON or OFF when one or more beam channels are interrupted, selectable by operation mode switch |
| Soportabilidad de tensión | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Salida:Categoría de utilización | DC-12 or DC-13 |
| Cumplimiento de la directiva de marcado CE | EMC Directive, RoHS Directive |
| Salida: Protección contra cortocircuitos | Incorporated |
| Función de prevención de interferencias | Incorporated (Up to 3 units can be mounted close together.) |
Especificaciones técnicas y datos de rendimiento
Guía de instalación y operación