En stock Producto destacado
USF4BH32CAJ05
USF4BH32CAJ05 SF4B-H32CA-J05 PANASONIC Safety Light Curtain Typ4 (PLe SIL3), Hand Protection, protective hei..
$0.00USD
4856 en stock
Especificaciones clave
Artículo:Specifications
PFHD:3.0 × 10-9(Note) Probability of dangerous failure per hour.
Cable:0.15 mm2(power line: 0.2 mm2) 12-core heat-resistant PVC cable with connector, 0.5 m 1.640 ft long
MTTFD:100 years or more(Note) Mean time to dangerous failure.
Información del proveedor
PANASONIC
Productos: 4316
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Artículo | Specifications |
| PFHD | 3.0 × 10-9(Note) Probability of dangerous failure per hour. |
| Cable | 0.15 mm2(power line: 0.2 mm2) 12-core heat-resistant PVC cable with connector, 0.5 m 1.640 ft long |
| MTTFD | 100 years or more(Note) Mean time to dangerous failure. |
| Detalles | Min. sensing object ø25 mm ø0.984 in (20 mm 0.787 in beam pitch) |
| Producto | Compact Safety Light Curtain[Type4 PLe SIL3] |
| Material | Enclosure: Polycarbonate |
| Paso de viga | 20 mm0.787 in |
| Accesorios | SF4B-TR25 (Test rod): 1 pc. |
| Número de pieza | SF4B-H32CA-J05 |
| Nombre del producto | Compact Safety Light Curtain[Type4 PLe SIL3] SF4B-C |
| Función ELCA | Incorporated (reducing mutual interference automatically) |
| Voltaje de potencia | 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Tiempo de respuesta | OFF response: 14 ms or lessON response: 80 to 90 ms |
| Número de producto | SF4B-H32CA-J05 |
| Extensión de cable | Extension up to total 50 m164.042 ftis possible for both emitter and receiver optional mating cables |
| Función de silenciamiento | Incorporated |
| Rango de operación | 0.3 to 7m0.984 to 22.966 ft(Note) The operating range is the possible setting distance between the emitter and the receiver. |
| Elemento emisor | Infrared LED (Peak emission wavelength: 850 nm0.033 mil) |
| Grado de contaminación | 3 |
| Función de anulación | Incorporated |
| Altura de protección | 663.4 mm 26.118 in |
| Función de enclavamiento | Incorporated [Manual reset / Auto reset](Note) The manual reset and automatic reset are possible to be switched depending on the wiring status. |
| Altitud de operación | 2,000 m6,561.68 ftor less(Note) Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m. |
| Funciones opcionales | Muting setting changing, override setting changing, fixed blanking, floating blanking, light emitting amount control, auxiliary output switching, protecting, interlock setting changing, external relay monitor setting changing(Note) In case of using optional function, the handy-controller SFB-HC is required. |
| Iluminancia ambiental | Incandescent light: 3,500 liter x or less at the light-receiving face |
| Mínimo objeto detectado | ø25 mm ø0.984 in opaque object(Note) In case the blanking function is valid, the operation mode is changed. |
| Número de canales de haz | 32 |
| Función de detención de emisiones | Incorporated |
| Silenciar la salida auxiliar | NPN open-collector transistor• Maximum sink current: 100 mA• Applied voltage: Same as supply voltage (between the muting auxiliary output and 0 V)• Residual voltage: 2.5 V or less (sink current 100 mA, when using 20 m65.617 ftlength cable) |
| Ángulo de apertura efectivo | plus or minus 2.5℃ or less [for an operating range exceeding 3 m9.843 ft(conforming to IEC 61496-2 / ANSI/UL 61496-2) ] |
| Normas aplicables: Japón | JIS B 9704-1 / 2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508-1 to 3 (SIL3) |
| Normas aplicables: Europa | EN 61496-1 (Type 4), EN ISO 13849-1:2015 (Category 4, PLe), EN 61508-1 to 3 (SIL3), EN 55011, EN 50178, EN 61000-6-2(Note) Regarding EU Machinery Directive, a Notified Body, TÜV SÜD, has certified with the type examination certificate. |
| Salidas de control (OSSD 1, OSSD 2) | PNP open-collector transistor / NPN open-collector transistor (switching method)• Maximum source current: 200 mA• Applied voltage: Same as supply voltage (between the control output and +V)• Residual voltage: 2.5 V or less (source current 200 mA, when using 20 m65.617 ftlength cable)• Leakage current: 0.1 mA or less (Including power supply OFF condition)• Maximum load capacity: 0.22 micro F (No load to maximum output current)• Load wiring resistance: 3Ωor less• Maximum sink current: 200 mA• Applied voltage: Same as supply voltage (between the control output and 0 V)• Residual voltage: 2.5 V or less (sink current 200 mA, when using 20 m65.617 ftlength cable)• Leakage current: 0.1 mA or less (Including power supply OFF condition)• Maximum load capacity: : 0.22 micro F (No load to maximum output current)• Load wiring resistance: 3Ωor less |
| Normas aplicables: América del Norte | ANSI / UL 61496-1 / 2 (Type 4), ANSI / UL 508, CAN / CSA 61496-1 / 2 (Type 4), CAN / CSA C22.2 No.14, OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI / RIA 15.06(Note) With regards to the standards in the US/Canada, a Notified Body, TÜV SÜD, has certified the CTÜVUS mark. |
| Función de monitorización de dispositivos externos | Incorporated |
| Salida auxiliar (salida sin seguridad) | PNP open-collector transistor / NPN open-collector transistor (switching method)• Maximum source current: 60 mA• Applied voltage: Same as supply voltage (between the auxiliary output and +V)• Residual voltage: 2.5 V or less (source current 60 mA, when using 20 m65.617 ftlength cable)• Maximum sink current: 60 mA• Applied voltage: Same as supply voltage (between the auxiliary output and 0 V)• Residual voltage: 2.5 V or less (sink current 60 mA, when using 20 m65.617 ftlength cable) |
| Función indicadora multiusos de gran tamaño | Incorporated |
| Silenciar salida auxiliar: Modo de funcionamiento | When muting auxiliary output: ON |
| Normativas y certificaciones aplicables | CE Marking (Machinery Directive, EMC Directive, RoHS Directive), UKCA Marking [Supply of Machinery (Safety) Regulations, EMC Regulations, RoHS Regulations], TÜV SÜD certification |
| Resistencia ambiental: Humedad ambiente | 30 to 85 % RH, Storage: 30 to 85 % RH |
| Resistencia ambiental: Resistencia a los golpes | 300 m / s2acceleration (30 G approx.) in X, Y and Z directions for three times each |
| Salida auxiliar de silenciamiento: Circuito de protección | Incorporated |
| Peso neto (Total de emisor y receptor) | approx. 750 g |
| Normas aplicables: Norma internacional | IEC 61496-1 / 2 (Type 4), ISO 13849-1:2015 (Category 4, PLe), IEC 61508-1 to 3 (SIL3) |
| Resistencia ambiental: Temperatura ambiente | -10 to +55℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: –25 to +60 ℃–3 to +140 ℉ |
| Resistencia ambiental: Grado de protección | IP65 (IEC) |
| Resistencia ambiental: Resistencia a la vibración | 10 to 55 Hz frequency, 0.75 mm0.030 inamplitude in X, Y and Z directions for two hours each |
| Resistencia ambiental: Resistencia de aislamiento | 20 MΩ or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Salidas de control (OSSD 1, OSSD 2): Modo de operación | ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the safety light curtain or the synchronization signal)(Note) During muting, control output will not turn off even if the beams are interrupted.(Note) When the blanking function is enabled, the operating mode will change. |
| Salidas de control (OSSD1, OSSD2): Circuito de protección | Incorporated |
| Resistencia ambiental: Resistencia a la tensión | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Salida auxiliar (salida sin seguridad): modo de funcionamiento | OFF when control outputs are ON, ON when control outputs are OFF (Factory setting, operating mode can be changed using the SFB-HC handy-controller.) |
| Salida auxiliar (salida sin seguridad): circuito de protección | Incorporated |
| Consumo de corriente: Se enciende el indicador multiusos grande. | Emitter: 85 mA or lessReceiver: 105 mA or less |
| Consumo de corriente: Luces indicadoras multiusos grandes apagadas | Emitter: 75 mA or lessReceiver: 95 mA or less |
Descripción del producto
SF4B-C Cat.4 Safety Barrier (PLe SIL3), 20 mm hand-to-beam protection, protected height 663.4 mm, operating range 0.3 to 7m, PNP/NPN, connector, IP65, muting function
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
