Horario de atención: Lunes a Viernes 9:00-18:00
UST4A1J1 - UST4A1J1 ST4-A1-J1 PANASONIC Safety, Thu-beam sensor, 15m, cable 1m
En stock Producto destacado

UST4A1J1

UST4A1J1 ST4-A1-J1 PANASONIC Safety, Thu-beam sensor, 15m, cable 1m

$0.00USD
3864 en stock
Especificaciones clave
Artículo:Specifications
Cable:Shielded cable with connector, 1 m3.281 ftlong
Detalles:Sensor head
Producto:Compact Type 4 Safety Beam Sensor
Información del proveedor
PANASONIC
PANASONIC
Productos: 4316
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico

Especificaciones técnicas

ParámetroValor
ArtículoSpecifications
CableShielded cable with connector, 1 m3.281 ftlong
DetallesSensor head
ProductoCompact Type 4 Safety Beam Sensor
MaterialEnclosure: PBT (Polybutylene terephthalate)Lens: AcrylicIndicator cover: Acrylic
Número de piezaST4-A1-J1
Nombre del productoCompact Type 4 Safety Beam Sensor ST4
Voltaje de potenciaSupplied from controller
Número de productoST4-A1-J1
Objeto de detecciónφ9 mmφ0.354 inor more opaque object
Extensión de cableExtention up to total 50 m164.042 ftis possible for both emitter and receiver with exclusive cable.
Rango de operación0.1 to 15 m0.328 to 49.213 ft(Note:The operating range is the possible setting distance between the emitter and the receiver. It can detect sensing object of less than 0.1 m 0.328 ft away.)
Elemento emisorInfrared LED (Peak emission wavelength: 870 nm0.034 mil)
Iluminancia ambientalIncandescent lamp: 3,500 Lx or less at the light-receiving face
Consumo actualEmitter: 11 mA or lessReceiver: 9 mA or less
Normas aplicablesIEC 61496-1/2 (JIS B 9704-1/2 / UL 61496-1/2) (Type 4), ISO 13849-1:2015 (Category 4, PLe), JIS B 9705-1 (Category 4), IEC 61508-1 to 3 (SIL3), IEC 62061 (SIL3), JIS C 0508-1 to 3 (SIL3), UL 1998, OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI/RIA R15.06, ANSI/ISA S84.01 (SIL3)(Note) Complies with those standards only when the sensor head is used in combination with the controller ST4-C11 / ST4-C12EX.
Indicador de emisión de hazGreen LED (lights up during beam emission, lights off during emission halt)
Ángulo de apertura efectivoplus or minus 2.5degrees or less for operating range exceeding 3 m 9.843 ft (required by IEC 61496-2 / UL 61496-2)
Indicador de interrupción del hazRed LED (lights up when the beam is interrupted or lock out, lights off during reception)(Note) Shows light interruption information between the emitter and the receiver with the same address. It does not show OSSD output.
Indicador de haz incidente estableGreen LED (lights up under stable light received condition, lights off under unstable light received condition)
Cumplimiento de la directiva de marcado CEMachinery Directive, EMC Directive, RoHS Directive
Peso (Total de emisor y receptor)Net weight: 100 g approx.Gross weight: 140 g approx.
Resistencia ambiental: Humedad ambiente30 to 85 % RH, Storage: 30 to 95 % RH
Resistencia ambiental: Resistencia a los golpes300 m/s2acceleration in X, Y and Z directions three times each
Resistencia ambiental: Temperatura ambiente-10 to +55 ℃+14 to +131℉(No dew condensation or icing allowed),Storage: -25 to +70 ℃-13 to +158℉
Resistencia ambiental: Grado de protecciónIP67 (IEC)
Resistencia ambiental: Resistencia a la vibración10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude or maximum acceleration 90 m/s2 in X, Y and Z directions for two hours each<
Resistencia ambiental: Resistencia de aislamiento20 MOhm or more with 500V DC megger between all supply terminals connected together and enclosure
Resistencia ambiental: Resistencia a la tensión1,000 V AC for one min. between all supply terminals connected together and enclosure

Descripción del producto

Category 4 safety barrier sensor head, independent beams, IP67, 0.1 to 15m, built-in 1m cable
Características clave
  • Calidad de grado industrial
  • Cumple con RoHS
  • Certificado CE
  • Garantía de 1 año

Documentos del producto

Hoja de datos

Especificaciones técnicas y datos de rendimiento

Manual de usuario

Guía de instalación y operación

Top