Horario de atención: Lunes a Viernes 9:00-18:00
FM-253-4-P - FM-253-4-P PANASONIC flow sensor FM200, 5l/minø4,PNP
En stock Producto destacado

FM-253-4-P

FM-253-4-P PANASONIC flow sensor FM200, 5l/minø4,PNP

$0.00USD
4700 en stock
Especificaciones clave
Artículo:Specifications
Peso:Net weight: 50 g approx., Gross weight: 115 g approx.
Detalles:Resin body type
Mostrar:4 digits + 4 digits 2-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation)
Información del proveedor
PANASONIC
PANASONIC
Productos: 4316
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico

Especificaciones técnicas

ParámetroValor
ArtículoSpecifications
PesoNet weight: 50 g approx., Gross weight: 115 g approx.
DetallesResin body type
Mostrar4 digits + 4 digits 2-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation)
ProductoIntegrated Display Type Digital Flow Sensor
MaterialEnclosure: ABS, Body: Polyamide (Aluminum body type: Aluminum), Switch: EPDM, Display: Acrylic, Mounting screw part (Resin body type): Brass Current plate / Port filter: Stainless steel (used for the gas contact area), Sensor chip: Silicon, Gasket: Fluorine rubber
LinealidadWithin ±3 % F.S. (Ambient temperature +25 ℃ +77 ℉, flow rate range 3 to 100 % F.S., atmospheric criteria on secondary side)
Tamaño del puertoø4 ø0.157 push-in
ProtecciónIP40 (IEC)
AccesoriosCN-F15-C1 (Connector attached cable 1 m 3.281 ft): 1 pc.
Número de piezaFM-253-4-P
Longitud del cableTotal length up to 10 m 32.808 ft is possible with 0.3 mm2, or more, cable.
Nombre del productoIntegrated Display Type Digital Flow Sensor FM-200
RepetibilidadWithin ±1 % F.S.
Entrada externaON voltage: +5 V to +VOFF voltage: 0 to +0.6 V, or openInput time: 80 ms or more
Número de productoFM-253-4-P
Tensión de alimentación12 to 24 V DC ± 10 % Ripple P-P10 % or less
Humedad ambiental35 to 90 % RH, Storage: 35 to 90 % RH
Fluido aplicableClean air, compressed air, nitrogen gas(Note):The clean air complies with JIS B 8392-1.1.1 to 5.6.2, and the compressed air complies with JIS B 8392-1.1.1 to 1.6.2.
Resistencia a los golpes100 m/s2acceleration (10 G approx.) in X, Y and Z directions three times each
Método de conexiónConnector
Resultados comparativosPNP open-collector transistor・Maximum source current: 50 m A or less・Applied voltage: 26.4 V DC or less(between comparative output and +V)・Residual voltage: 2.4 V or less (at 50 mA source current)
Puesta a tierra del envolventeFloating(Note):As a varistor (clamping voltage: approx. 40 V) is connected to the aluminum body type, do not apply voltage higher than the rated voltage of the sensor.
Temperatura ambiente0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage: -10 to +60 ℃ +14 to +140 ℉
Consumo actualNormal mode: 60 mA or less, ECO mode: 40 mA or less
Caudal a escala completa5 ℓ/min.(Note):Converted to volumetric flow at +20 ℃ +68 ℉ and 1 atmospheric pressure (101 kPa).
Rango de presión nominal-0.09 to +0.7 MPa
Resistencia a la vibración10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude or 49 m/s2max. acceleration, in X, Y and Z directions for two hours each
Salida de voltaje analógicaOutput voltage: 1 to 5 V, Output impedance: 1 kΩ approx.[Refer to "Analog voltage output" for more details.]
Resistencia de aislamiento10 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure (Excluding the aluminum body type)
Rango de garantía de precisiónBi-direction : -100 to -3 % F.S., +3 to +100 % F.S.One-side direction : +3 to +100 % F.S.(Note):Take care that if fluid flows in the vicinity of zero-point which is out of the accuracy assurance range, the instant flow rate value may forcibly display "zero", or the integrated flow display value may not be counted up, or the integrated pulse output may not be outputted.
Características de presiónWithin ±5 % F.S. (-0.09 to +0.7 MPa, +25 ℃ +77 ℉, atmospheric criteria on secondary side)
Soportabilidad de tensión1,000 V AC for one min. between all supply terminals connected together and enclosure (Excluding the aluminum body type)
Soportabilidad a la presión1 MPa
Valor integrado especificado0.05 ℓ
Características de temperaturaWithin ±0.2 % F.S./℃ (+25 ℃ +77 ℉ criteria, +15 to +35 ℃ +59 to +95 ℉ ambient temperature range)
Salida comparativa: HistéresisWindow comparator mode: 1 to 8 % F.S. approx. (variable) (Factory settings: approx. 1 % F.S.), Hysteresis mode: Variable (minimum 1 digit)
Cumplimiento de la directiva de marcado CEEMC Directive, RoHS Directive
Salida comparativa:Modos de salidaOutput OFF mode, window comparator mode, hysteresis mode, integrated output mode, integrated pulse output mode
Caudal instantáneo:Rango de visualización-5.5 to +5.5 ℓ/min.(Note):The display flow rate range is the case when setting to bi-direction at the flow direction setting. When the flow direction is set to one-side forward direction or one-side reverse direction, the negative side of the display flow rate range shows 10 % of the full-scale (F.S.).
Resultado comparativo: Tiempo de respuesta50 ms, 80 ms, 120 ms, 200 ms, 400 ms, 800 ms, 1,500 ms, selectable by key operation
Caudal integrado:Rango de visualización±99999.99 ℓ(Note):The display flow rate range is the case when setting to bi-direction at the flow direction setting. When the flow direction is set to one-side forward direction or one-side reverse direction, the negative side of the display flow rate range shows 10 % of the full-scale (F.S.).
Salida comparativa: Protección contra cortocircuitosIncorporated
Caudal instantáneo:Configuración y resolución de visualización0.01 ℓ/min.
Caudal integrado:Configuración y resolución de visualización0.01 ℓ

Descripción del producto

More details
Características clave
  • Calidad de grado industrial
  • Cumple con RoHS
  • Certificado CE
  • Garantía de 1 año

Documentos del producto

Hoja de datos

Especificaciones técnicas y datos de rendimiento

Manual de usuario

Guía de instalación y operación

Top