En stock Producto destacado
UFX501
UFX501 FX-501 PANASONIC Fiber amplifier, NPN, 1 digital output, double display, connector type
$0.00USD
4516 en stock
Especificaciones clave
Artículo:Specifications
Cable:-
Producción:NPN open-collector transistor- Maximum sink current: 100 mA (Note 1)- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (Note 2) (at maximum sink current)(Note 1) 50 mA max. if 5 or more standard types are connected together.(Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)
Peso:Net weight: 15 g approx.Gross weight: 70 g approx.
Información del proveedor
PANASONIC
Productos: 4316
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Artículo | Specifications |
| Cable | - |
| Producción | NPN open-collector transistor- Maximum sink current: 100 mA (Note 1)- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (Note 2) (at maximum sink current)(Note 1) 50 mA max. if 5 or more standard types are connected together.(Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type) |
| Peso | Net weight: 15 g approx.Gross weight: 70 g approx. |
| Detalles | Standard type |
| Producto | Digital Fiber Sensor |
| Material | Enclosure, Case cover: PolycarbonateSwitch: Polyacetal |
| Accesorio | FX-MB1 (Amplifier protection seal): 1 set |
| Protección | IP40 (IEC) |
| Número de pieza | FX-501 |
| Nombre del producto | Digital Fiber Sensor FX-500 Ver.2 |
| Tiempo de respuesta | H-SP: 25 micro s or lessFAST: 60 micro s or lessSTD: 250 micro s or lessLONG: 2 ms or lessU-LG: 4 ms or lessHYPR: 24 ms or less, selectable |
| Entrada externa | - |
| Número de producto | FX-501 |
| Tensión de alimentación | 12 to 24 V DC+10-15 % Ripple P-P 10 % or less |
| Función de temporizador | Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffective |
| Extensión de cable | - |
| Varios ajustes | Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc. |
| Consumo de energía | Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage) |
| Temperatura ambiente | -10 to +55 ℉+14 to +131 ℉[If 4 to 7 units are mounted in cascade: -10 to +50 ℉+14 to +122 ℉or if 8 to 16 units are mounted in cascade: -10 to +45 ℉+14 to +113 ℉] (No dew condensation or icing allowed), Storage: -20 to +70 ℉-4 to +158 ℉ |
| Ajuste de sensibilidad | 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment |
| Salida:Puntos de salida | 1 point |
| Salida:Operación de salida | Switchable either Light-ON or Dark-ON by L/D mode |
| Función del temporizador:Periodo del temporizador | Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx.Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx.Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx.each output is set individually |
| Elemento emisor (modulado) | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| Cumplimiento de la directiva de marcado CE | EMC Directive, RoHS Directive |
| Salida: Protección contra cortocircuitos | Incorporated |
| Función de ajuste de la cantidad de emisión | Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode] |
| Función de prevención de interferencias | Incorporated (Note) , selectable either automatic interference prevention or different frequency(Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units.- Number of sensor heads mountable closely (Unit: set)Response time: IP-1H-SP: 0FAST: 2STD: 4LONG: 8U-LG: 8HYPR: 12 |
| Posible función de entrada externa | - |
| Rango de visualización de la intensidad de la luz incidente | H-SP / FAST / STD: 0 to 4,000LONG: 0 to 8,000U-LG / HYPR: 0 to 9,999 |
| Entrada externa (conmutable con Salida 2) | - |
Descripción del producto
FX-500 F Amplifier. Optical, NPN output, dual display, high sensitivity and detection distance, ultra-fast.
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
