En stock Producto destacado
UFX505C2
UFX505C2 FX-505-C2 PANASONIC Fiber amplifier, NPN, analogue output, double display
$0.00USD
4554 en stock
Especificaciones clave
Artículo:Specifications
Cable:0.2 mm26-core cabtyre cable, 2 m6.562 ftlong
Peso:Net weight: 60 g approx.Gross weight: 100 g approx.
Detalles:Cable type
Información del proveedor
PANASONIC
Productos: 4316
Normalmente se envía dentro de 2-3 días hábiles
Calidad garantizada
Envío rápido
Soporte técnico
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Artículo | Specifications |
| Cable | 0.2 mm26-core cabtyre cable, 2 m6.562 ftlong |
| Peso | Net weight: 60 g approx.Gross weight: 100 g approx. |
| Detalles | Cable type |
| Producto | Digital Fiber Sensor |
| Material | Enclosure, Case cover: PolycarbonateSwitch: Polyacetal |
| Accesorio | FX-MB1 (Amplifier protection seal): 1 set |
| Protección | IP40 (IEC) |
| Número de pieza | FX-505-C2 |
| Nombre del producto | Digital Fiber Sensor FX-500 Ver.2 |
| Salida analógica | Output current: 4 to 20 mA approx. [H-SP, FAST STD: At 0 to 4,000 digits, LONG: At 0 to 8,000 digits (Note) ]Response time: 2 ms or lessZero point: Within 4 mA plus or minus 1 % F.S.Span: Within 16 mA plus or minus 5 % F.S.Linearity: Within plus or minus 3 % F.S.Load resistance: 0 to 250 Ohm(Note) If display adjustment was conducted, it is not in this range. |
| Tiempo de respuesta | H-SP: 25 micro s or lessFAST: 60 micro s or lessSTD: 250 micro s or lessLONG: 2 ms or lessU-LG: 4 ms or lessHYPR: 24 ms or less, selectable |
| Entrada externa | NPN non-contact input- Signal conditionHigh: +8 V to +V DC or OpenLow: 0 to +1.2 V DC(at 0.5 mA source current)- Input impedance: 10 kOhm approx. |
| Número de producto | FX-505-C2 |
| Tensión de alimentación | 12 to 24 V DC+10-15 % Ripple P-P 10 % or less |
| Función de temporizador | Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffectiveIncorporated with variable OFF-delay / ON-delay /One-shot timer, switchable either effective or ineffective |
| Extensión de cable | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC or more) |
| Varios ajustes | Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc. |
| Consumo de energía | Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage, excluding analog output)ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage, excluding analog output) |
| Salida 1, Salida 2 | NPN open-collector transistor- Maximum sink current: 50 mA (Note 1)- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (Note 2) (at maximum sink current)(Note 1) 50 mA max. if 5 or more standard types are connected together.(Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type) |
| Temperatura ambiente | -10 to +55 ℉+14 to +131 ℉[If 4 to 7 units are mounted in cascade: -10 to +50 ℉+14 to +122 ℉or if 8 to 12 units are mounted in cascade: -10 to +45 ℉+14 to +113 ℉] (No dew condensation or icing allowed), Storage: -20 to +70 ℉-4 to +158 ℉ |
| Ajuste de sensibilidad | 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment |
| Función del temporizador:Periodo del temporizador | Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx.Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx.Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx.each output is set individually |
| Elemento emisor (modulado) | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| Cumplimiento de la directiva de marcado CE | EMC Directive, RoHS Directive |
| Función de ajuste de la cantidad de emisión | Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode] |
| Función de prevención de interferencias | Incorporated (Note) , selectable either automatic interference prevention or different frequency(Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units.- Number of sensor heads mountable closely (Unit: set)Response time: IP-1H-SP: 0FAST: 2STD: 4LONG: 8U-LG: 8HYPR: 12 |
| Salida 1, Salida 2:Puntos de salida | 2 points |
| Posible función de entrada externa | Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable |
| Salida 1, Salida 2: Operación de salida | Switchable either Light-ON or Dark-ON by L/D mode |
| Rango de visualización de la intensidad de la luz incidente | H-SP / FAST / STD: 0 to 4,000LONG: 0 to 8,000U-LG / HYPR: 0 to 9,999 |
| Entrada externa (conmutable con Salida 2) | - |
| Salida 1, Salida 2: Protección contra cortocircuitos | Incorporated |
Descripción del producto
FX-500 F Amplifier. Optical, analog output, 2 NPN outputs, dual display, high sensitivity and detection distance, ultra-fast
Características clave
- Calidad de grado industrial
- Cumple con RoHS
- Certificado CE
- Garantía de 1 año
Documentos del producto
Hoja de datos
Especificaciones técnicas y datos de rendimiento
Manual de usuario
Guía de instalación y operación
